601594
33
Zoom out
Zoom in
Previous page
1/448
Next page
Installing guide bar and saw chain
441 076_b 33
INSTALLING GUIDE BAR AND SAW CHAIN
A standard saw unit package contains the items as shown below:
(1) Power unit
(2) Saw chain
(3) Guide bar
(4) Guide bar cover
(5) Plug wrench
(6) File
Open the box and install the guide bar and the saw chain on the power
unit as follows.
WARNING!
The saw chain has very sharp edges. Use protective gloves for
safety.
1 Pull the guard towards the front handle to check that the chain brake
is not on.
2 Loosen two nuts (12), then remove the clutch cover (13) and the spa-
cer (11).
3 Gear the chain to the sprocket and, while fitting the saw chain around
the guide bar, mount the guide bar to the power unit. Fit the chain ten-
sioner nut (8) into the lower hole (7) of the guide bar, then install the
clutch cover, and fasten the mounting nut to finger tightness. Make
sure the pin (9) on the clutch cover has inserted in the hole (10) on
the engine base.
(7) Hole (8) Tensioner nut
(9) Pin (10) Hole
(11) Spacer (12) M8 nuts
(13) Clutch cover
ADVICE
Pay attention to the correct direction of the saw chain.
(1) Moving direction
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Al-ko BKS 4040 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko BKS 4040 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info