601593
38
Zoom out
Zoom in
Previous page
1/448
Next page
en
Operation
38 BKS 3835 / BKS 4040
WARNING!
When the brake operates, release the throttle lever to slow down
the engine speed. Continuous operation with the brake engaged
will generate heat from the clutch and may cause trouble.
Be sure to confirm brake operation on the daily inspection.
How to confirm:
1) Turn off the engine.
2) Holding the chain saw horizontally, release your hand from the front
handle, hit the tip of the guide bar to a stump or a piece of wood, and
confirm brake operation. Operating level varies by bar size. In case the
brake is not effective, ask our dealer inspection and repairing.
CARBURETOR ANTI-FREEZE MECHANISM
Operating chain saws in temperatures of 0 – 5°C at times of high humi-
dity may result in ice forming within the carburetor, and this in turn may
cause the output power of the engine to be reduced or for the engine to
fail to operate smoothly.
(1) Cylinder cover (2) “Sunshine” mark (3) “Snow” mark (a) Normal ope-
rating mode (b) Anti-freeze mode This product has accordingly been
designed with a ventilation hatch on the right side of the surface of the
cylinder cover to allow warm air to be supplied to the engine and to the-
reby prevent icing from occurring. Under normal circumstances the pro-
duct should be used in the normal operating mode, i.e., in the mode
which it is set at the time of shipment.
However when the possibility exists that icing may occur, the unit
should be set to operate in the anti-freeze mode before use Continuing
to use the product in the anti-freeze mode even when temperatures
have risen and returned to normal, may result in the engine failing to
start properly or in the engine failing to operate at its normal speed, and
for this reason you should always be sure to return the unit to the nor-
mal operating mode if there is no danger of icing occurring.
HOW TO SWITCH BETWEEN OPERATING MODES
(1) Cylinder cover
(2) Choke knob
(3) Icing cap
1 Flip the engine switch to turn off the engine.
2 Remove the cover to the air filter, remove the air filter, and then re-
move the choke knob from the cylinder cover.
3 Loosen the screws holding the cylinder cover in place (i.e., the three
screws on the inside and the one screw on the outside of the cover),
and then remove the cylinder cover.
4 Press with your finger down on the icing cap located on the right-
hand side of the cylinder cover to remove the icing cap.
5 Adjust the icing cap so that the “snow” mark faces upwards and then
return it to its original position in the cylinder cover.
6 Fix the cylinder cover back into its original position, and then fix all
other parts back into their proper positions.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Al-ko BKS 3835 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko BKS 3835 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info