Manual Al-ko AL-KO BC 1000 E (page 15 of 166) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish)

594311

Zoom out

Zoom in

1/166

440 102 _a

Starting the electric brushcutter

1. Guide the extension cable through the strain relief,

see Fig. 6.

2. Connect the extension cable to the mains supply.

3. Pass the carry strap over your left shoulder (Fig. 7)

and hook the strap into the eye on the top handlebar

(Fig. 1/7)

4. Stand securely.

5. Hold the machine with both hands. Do not place the

cutter head on the ground when doing this.

6. With one hand, grip the auxiliary hand grip (Fig. 1/8);

with the other hand, grip the upper handle (Fig. 1/4)

and, at the same time, press the lower switch, see

Fig. 8.

7. Press the switch in the upper handle (Fig. 1/5) and

hold it pressed, see Fig. 8. The machine only runs

when both switches are pressed.

8. Let the electric brushcutter run at idling speed for a

few seconds. This causes the cutting line to be cut off

to the correct length.

9. The machine switches off when a switch is released.

After the machine has been switched off, the spool

head continues to rotate for a few seconds.

Operation

 Switch on the machine before approaching the grass

to be cut.

 Angle the machine forwards slightly, max. 30°, and

walk forwards slowly.

 Sweep the machine to the right and left in order to cut

the grass.

Long grass must be cut in several passes. Always proceed

from top to bottom.

Tap the spool head on the ground from time to

time when working. The automatic tip function

always keeps the line at optimum length.

 Make sure the motor is stopped before you remove

any cuttings.

IMPORTANT!

The vibration value during use of the electrical

implement may differ from the indicated value,

depending on what the machine is used for.

 Do not overload the machine during work.

Extending the cutting line

1. Run the motor at full speed and tap the spool head on

the ground.

 The line is automatically extended.

The knife on the guard plate shortens the line to

the permitted length.

Trimming

1. Check the ground and dene what is the required cut

height.

2. Guide the spool head at the required height and hold

it there.

3. Sweep the machine from side to side with a scything

motion.

4. Always keep the spool head parallel with the ground.

Low trimming

1. Guide the machine with a slight forward angle so that

it moves just above the ground level.

2. Always trim away from your body.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko AL-KO BC 1000 E in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Al-ko AL-KO BC 1000 E Manual

Product: