594636

Al-ko AL-KO 532-02 Manual

12
Zoom out
Zoom in
Previous page
1/48
Next page
EN
12
ALWAYS CHECK BEFORE STARTING THAT:
THE MACHINE IS IDLING
THE CLUTCH HAND-LEVER IS LIFTIED AND LOCKED WITH IST PUSH-BUTTON (Fig. 7 Ref. "A" and "B")
THE BAR IS DISENGAGED THROUGH IST LEVER (Pict. 8 Pos. "A").
SAFETY DEVICE FOR STOPPING THE ENGINE
The main function of the lever (Ref. "2" Pict. 1) is to turn off the engine when releasing your hands from the steering handles.
Do not ever tie the "MOTOR STOP" lever "A" to the handlebar knob.
Before you start to mow, check that the motor shuts off with the "STOP" lever raised.
MOTOR STOP: lever "A" is engaged; MOTOR START : lever "A" is released.
In case of danger the machine will immediately stop after releasing with the left hand the "stop engine safety device".
OPERATING AND REGULATING THE MACHINE
Before you start mowing, oil the cutting blade, then start the motor as follows:
Fig. 10
• The release of the wheels and bar clutches should be done with the engine running at low speed.
• Engaging the transmission to the wheels and the cutting bar by means of the clutch lever must be carried out
with the motor at a middle r.p.m. and by slowly releasing the lever.
• When starting to mow, position the accelerator lever at 3/4 or at "MAX" to ensure adequate power
(Fig.1 Ref. “1”).
• When mowing along a wall or the edge of a sidewalk, be careful to keep a safety distance so that the blade
does not suffer impact. If not, the cutting bar may undergo damage.
• When moving forward or back with the mower running, first squeeze the clutch lever which will block the bar,
then squeeze the wheel release lever and move as needed.
• The handles can be adjusted in height and sideways (Fig. 10 Ref. “A”) by a multi-toothed device.
• You can adjust the cutting height of the grass by the skids on the cutter bar (see instructions on the bars)
•
To regulate the motor, read the manual on the motor under "REGULATIONS".
ATTENTION: DO NOT LEAVE THE MACHINE RUNNING WHEN NOT IN OPERATION
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Al-ko AL-KO 532-02 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko AL-KO 532-02 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 5,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info