594599
24
Zoom out
Zoom in
Previous page
1/124
Next page
Safety regulations
ENGLISH 4
1. Safety regulations
1.1 Correct use / General safety instructions
The brushcutter must only be used to cut grass, reeds, weeds and wild growth at ground level. The brushcutter
must not be used for any other purposes (see chapter 7.1 "Scope of Application").
Read the operating instructions carefully before placing in service and keep them in a safe place.
Use this power tool with particular caution.
Non-observance of safety instructions can lead to a risk to life. Also observe any regulations from your
professional body. These operating instructions must always be available at the place of work. All individuals
instructed to work with the equipment (including maintenance, care and repair), should read these instructions.
You should request and receive instructions from the vendor on the safe operation if you are using this type
of product for the first time.
Children and young people under 18 years may not work with this power tool, with the exception of young
people over 16 years of age who are being trained under supervision.
Keep bystanders and animals away from the working area. Maintain a minimum distance of 15 m. When
working near thickets, be aware that children and animals may be hidden there. Immediately stop the
machine and the cutter if any person or animal comes close to the working area. The operator is
responsible for any accidents or damage caused to parties or property.
The device must only be lent, hired or passed on to persons who are familiar with this type of tool and who
have read the operating instructions and know how to use the tool. Always pass on both sets of operating
instructions together with the tool.
Ensure you are rested and in good health when using this machine.
Persons under the influence of alcohol or drugs, including prescription drugs, are not allowed to use this
machine, as their ability to quickly react to potential danger may be impaired.
Never alter, change or modify any safety equipment or functional assemblies on this machine.
Only use this machine if it is in good, safe condition. Always check the machine prior to use. Risk of
accident!
Only use those accessories and attachments that have been supplied by the manufacturer and that are
expressly approved for attachment. When using a nylon head, never replace a plastic line with a steel line.
Always use the appropriate contact protection with each cutter.
Always stop the engine and remove the spark plug cap when changing cutters to prevent unintentional
starting of the engine.
The reliability and safe operation of your machine depend on the quality of parts used with the machine.
Only use original spare parts. Original spare parts are identical with genuine production parts and
guarantee best quality in material, dimensions, function and safety. Original parts and accessories are
available from your specialist dealer. Your dealer has been supplied with appropriate documentation to
determine the correct parts. Your dealer is frequently supplied with updates about improvements to the
equipment. Please note that the use of non-original parts will void your warranty.
Always store the machine in a safe place and in such a way that it will not pose any danger. Stop the
engine when the machine is not used.
Persons who disregard safety instructions, operating or maintenance instructions may be liable for any damage
or consequential losses.
1.2 Working clothes
To prevent injuries, always wear suitable clothing and safety equipment when working with this power tool. This
clothing should be practically oriented to the application (for example a tight fitting work suit), but should not be
confining.
We recommend: SOLO forest and countryside work jacket EN 340 Part no: 99303000 + size (2[s] - 6[xxl])
SOLO Outdoor Knee-breeches Part no: 9902095 + size
or SOLO Outdoor dungarees Part no: 9902094 + size
Never wear scarves, ties, jewellery or other items of clothing, which might get caught in the equipment, in brush
or on branches. Safely tie back long hair (use a cap, helmet or similar).
Wear sturdy shoes with a good tread - ideally safety shoes.
We recommend: SOLO leather forest boots Part no: 9930510 + size (36 - 48)
Wear protective gloves with non-slip palms.
We recommend: SOLO Fit Part no: 9939012 + size.
Use ear defenders and/or a visor for protection against flying objects or objects caught up in the
turbulence (protective goggles for example).
We recommend: SOLO face/ear protection pack Part no: 993901002 (one size)
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Al-ko AL-KO 142 SB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko AL-KO 142 SB in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 8,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info