594592

Al-ko AL-KO 137 SB Manual

31
Zoom out
Zoom in
Previous page
1/124
Next page
Preparing the equipment for use
ENGLISH 11
4.3 Installation - Bicycle handlebar
• Remove quick release screw (15) with sleeve (19)
and wavy washer (20) from the handle support
(14)
• Take off the two half shells (a) from the handle
support.
• Position the two-handed "bike handle" (5) with the
two half shells (a) on the handle support (14).
• Insert quick release screw (15) with sleeve (19)
and wavy washer (20) into the handle support, but
only so far that the quick release mechanism can
still flip over when the handle is sitting tight. The
quick release mechanism can be flipped over to
the front or rear. If the handle is not quite tight yet,
tighten the quick release screw another half turn
and flip the mechanism to the opposite side.
• The r.h. side of handle should be fitted as near as
possible to the handle support..
• In order to adjust the handle to the perfect
position, flip up the quick release mechanism and
loosen the screw one turn if necessary.
• Adjust the handle and screw the quick release
screw (15) back in again, then flip the quick
release mechanism back over.
Note: You will have achieved an optimum
adjustment, if the centre of the power tool is at the
centre of your body. Your elbow should be slightly
angled in operating position.
Important: Always lead the brushcutter with the
bicycle handlebar on the r.h. side of the body!
4.4 Shoulder strap adjustment
Before commencing work, adjust the shoulder strap
and handle according to the operator’s body size.
The brushcutter has to be balanced after the hook
(Fig.1, pos. 12) is placed in the strap hanger. To
balance the brushcutter the hook is hung in one of
the various fastening holes. Release the strap on the
respective hook.
The cutting tool must come to rest directly above the
ground (0 cm - 10 cm) when your hands are off the
attached brushcutter.
Fig. 9
Fig. 10
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Al-ko AL-KO 137 SB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko AL-KO 137 SB in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 8,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info