603973
30
Zoom out
Zoom in
Previous page
1/68
Next page
8 Maintenance and care
For your own safety, remove the spark
plug cap from the spark plug (12) prior
to any maintenance work or cleaning.
Any maintenance and care that go beyond the
described explanations need to be left to an
authorized Service Center.
8.1 Cleaning the mower
After each use, the mower needs to be
thoroughly cleaned. Special attention needs to
be given to the lower side, the blade and the
cutting area circle.
Tip: To enable the lawnmower to be maintained
and cleaned with an empty fuel tank, fill only
enough fuel for the mowing job in hand. That
way, the tank can be quickly emptied after
mowing has been completed.
After releasing handle screw (15), the mower
can be raised onto its rear wheels and be
supported on the lower handle. First pull the
spark plug cap. The fuel tank should be empty,
if possible, to prevent fuel spilling from the fuel
tank cap. Catch any fuel running out of the
carburettor with a suitable rag.
Dirt and grass debris is removed easily
immediately after mowing. Imbedded grass
debris and dirt on the mower deck‘s lower
section interrupt the grass collection and affect
cutting results. Imbedded dirt on the blade and
on the blower wheel lead to imbalance and
consequently to vibration.
Check also for cleanliness of the duct.
The ejection air duct can be cleaned with a
small stick or with a screw driver.
Do not spray the mower with a hose or high
pressure cleaning hose.
The engine has to remain dry.
The outer deck parts can simply be kept clean
by wiping the unit off with a rag. Strong cleaning
agents of any kind are not to be used.
8.2 Wheel axles and wheel hubs
Wheel axles and wheel hubs are to be
lubricated occasionally (at least once a year).
Remove the wheel cap, loosen the screw and
remove the wheel. During disassembly observe
the sequence for the reassembly of the parts.
8.3 Height adjustment
Before storing your lawn mower out of season
clean and lubricate the wheel adjuster spindle
with grease (this procedure is necessary at
least annually).
For this, set the wheel adjuster to its highest
position (max), clean and lubricate the exposed
part of the spindle with grease. Then set the
wheel adjuster to its lowest position (min), clean
and lubricate the remaining spindle with grease.
8.4 Air filter maintenance
Follow the instructions of the manufacturer of
the motor.
8.5 Mowing blade
To obtain best mowing results we recommend
to have the blade sharpened / balanced or
replaced at least once every year.
Special tools, such as a torque wrench for
example, are required to mount the blade
to the mower. For safety reasons we
recommend that the mowing blade is
sharpened, balanced and re-fitted by an
authorized specialist workshop only. The
following notes are therefore only intended for
specialist repair shops.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Al-ko 582 127129 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko 582 127129 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 2,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info