Manual Al-ko 582 127129 (page 26 of 68) (English, German, French, Spanish)

603973

Zoom out

Zoom in

1/68

4.8 Service and storage

Caution: Before every service,

cleaning and storage stop the engine

and remove the spark plug cap.

• Take care that all screw connections are

tightened.

• Never store the mower with gasoline in fuel

tank in a building where gasoline vapours

may come in contact with open fires or

where sparks could ignite fumes.

• The fuel tank should be emptied outdoors.

Use suitable containers for draining

gasoline.

• Let the engine run until the gasoline

remaining in the carburettor is depleted.

• Let the engine cool off prior to storage in an

enclosed area.

• To avoid danger of fire, clean grass, leaves

or escaping grease (oil) off engine, muffler

and fuel tank.

• On a regular basis, check the grass

catching device and check the ejection

shield for wear and tear and sound

operation.

• For safety reasons, replace worn or

damaged parts.

• Always wear protective gloves when

working near the cutting device‘s vicinity.

• Servicing and repairs are only to be

conducted when engine is turned off and

when spark plug cap is removed.

• For warranty purposes and safety reasons

only solo by AL-KO replacement parts

should be used.

Ensure that the tank is fully drained before any

maintenance, assembly, disassembly or

modification.

5 Preparing the equipment for use

5.1 Assembly

Prior to assembly make sure that the

Bowden cable (17) is not damaged.

When assembling and when folding or unfolding

the handle, take care not to jam, bend or

damage the Bowden cable! If necessary, shift

and twist the Bowden cable fixtures (18).

Procedure for attaching the upper part of the

handle

Place the free ends of the upper

part of the handle from the

outside on the lower parts of the

handle.

Insert the coach bolts

M8x45 mm on both sides of the

handle from the outside to the

inside through both parts of the

handle. Slip the curved washers

on the bolts and if necessary

turn the washers to fit them onto

the handle.

Tighten both butterfly nuts on

the curved washers.

Placing the starter grip in the rope eyelet

Release the engine brake by pushing the motor

release bracket (1) towards the mower handle.

Slowly pull the starter handle and rest the

starter grip (5) in the rope eyelet (4) on the

upper part of the handle.

5.2 Height adjustment of the handle

In order to allow different sized people back-

friendly mowing, the inclination and thus the

height of the handle is adjustable.

When adjusting the handle inclination,

take care not to jam, bend or damage the

Bowden cable (17)!

Procedure for adjusting the handle inclination

Loosen both butterfly

nuts (a) of the

clamping device.

Move the handle to

the desired position

within the clamping

blocks and make

sure that both lower

parts of the handle

are on the same

height in of the three

possible positions

and fit completely in

the clamping block

recesses. Re-tighten

both butterfly nuts.

5.3 Grass catching device

Stop the engine prior to installing or

removing the grass catching device.

(Stopping the engine: See chap. 6.2)

The ejection shield (7) is designed for

your personal safety. The ejection shield

must be permanently closed when using the

lawn mower without grass catching device (6).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko 582 127129 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 2,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Al-ko 582 127129 Manual

Product: