592620
24
Zoom out
Zoom in
Previous page
1/344
Next page
GB
Translation of original user instructions
24
Petrol lawnmower
Mowing with the grass catcher
Caution - Risk of injury!
Attach/detach the grass catcher only when the
motor is switched off and the mower blade has
come to a standstill.
1. Liftthedeectorplateandinsertthegrasscatcher
in the holders ( 6).
Fill level indicator
Thelllevelindicatorispushedupwardbytheairow
when mowing ( 5a).
If the grass catcher is full, the indicator points to the box
( 5b). The grass catcher must be emptied.
Emptying the grass catcher
1. Liftthedeectorplate.
2. Unhook the grass catcher and pull backward to
remove ( 6).
3. Empty the grass catcher.
4. Liftthedeectorplateandinsertthegrasscatcher
in the holders ( 6).
Initial startup
Caution!
The equipment should not be used if the cutting
gear and/or fastenings are loose, damaged or
worn.
Carry out a visual inspection before each start-
up.
The camera symbol on the following page refers
to the illustrations on Page 4–7.
Adjusting the cutting height
Caution - Risk of injury!
Adjust the cutting height only with the motor
switched off and when the mower blade has
come to a standstill.
Always set all the wheels to the same cutting
height.
Cutting height adjustment depends on the
particular model.
Central adjustment ( 1)
1. Press and hold the central height adjustment knob
( 1/1).
For shorter grass, press the central adjustment
handle downward ( 1/2)
For longer grass, pull the central adjustment
handle upward ( 1/2)
The central height adjustment level is indicated
( 1/3)
2. Release the knob at the desired cutting height.
Axle adjustment or central adjustment ( 2, 3)
1. To release the lever, press to the side and hold.
2. Push the lever to the left or right to select the
desired cutting height.
3. Let the lever click into position.
4. Check that all wheels are set to the same position.
axle adjustment ( 4)
1. To release the lever, press to the side and hold.
2. Push the lever to the left or right to select the
desired cutting height.
3. Let the lever click into position.
4. Check that all wheels are set to the same position.
Mowing without the grass catcher
Caution!
Only work without the grass catcher if the
deectorplatetorsionspringisworkingcorrectly.
The deector plate is held to the mower housing by
spring force. This causes the mowed grass to be thrown
backward and downward.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Al-ko 4855 SP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko 4855 SP in the language / languages: All languages as an attachment in your email.

The manual is 10,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info