592613
27
Zoom out
Zoom in
Previous page
1/344
Next page
GB
27455 999_a
Blade coupling (optional)
With the blade coupling, the mower blade can be
engaged or disengaged while the motor is running.
Engaging the blade coupling
1. Pull in the safety brake handle on the handlebar
and hold it ( 16) - The brake handle does not
lock.
2. Push the coupling lever away from you ( 14/1)
- The blade coupling is engaged.
Disengaging the blade coupling.
3. Release the safety brake handle ( 22).
- The blade coupling is disengaged.
- The coupling lever moves to rest position ( 14/2).
Electrostart without primer/choke ( 13)
1. Set the throttle lever to the "S TA R T " position
( 13/1).
2. Pull in the safety brake handle on the handlebar and
hold it ( 16) – the brake handle does not lock.
3. Turn the ignition key fully to the right in the ignition
lock ( 18).
4. As soon as the motor starts running, release the
ignition key (it returns automatically to position "0").
5. According to the desired motor speed, set the
throttle lever to a position between min and
max.
Turn the motor off
Lawnmower without blade coupling
1. Set the throttle lever to position min ( 12/2).
2. Release the safety brake handle ( 22).
- The motor is switched off.
Caution - danger of serious cut injuries!
The motor may continue running. After switching
off, make sure the motor has stopped turning.
Lawnmower with blade coupling
1. Release the safety brake handle ( 25).
2. Set the throttle lever to position min ( 12/2).
- The motor is switched off.
Caution - danger of serious cut injuries!
The motor may continue running. After switching
off, make sure the motor has stopped turning.
Wheel drive (optional) ( 20)
Caution!
Engage the transmission only when the motor is
running.
Switching on the wheel drive
1. Press the transmission control handle against the
handlebar and hold it ( 19) – the transmission
control handle does not lock.
- The wheel drive is switched on.
Switching off the wheel drive
1. Release the transmission control handle ( 21).
- The wheel drive is switched off.
Vario transmission (Speed Control) (optional)
The Vario transmission allows continuous variation of the
ground speed of the lawnmower.
Caution!
Operate the lever only when the motor is running.
Operating the lever without the motor drive may
damage the drive mechanism.
To increase the speed, pull the lever ( 20)
towards ( 20/2)
To lower the speed, pull the lever ( 20) towards
( 20/1)
Always adjust the ground speed to suit the current
ground and lawn conditions.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Al-ko 4605 SP BIO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko 4605 SP BIO in the language / languages: All languages as an attachment in your email.

The manual is 10,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info