520610
5
Zoom out
Zoom in
Previous page
1/16
Next page
5
Loosen the screws and turn down the cover - Drill two holes with Ø 6mm into the wall (see figure 4).
Make sure there are no other installations close to the drill holes (e. g. electric wirings, water pipes) – Fix
the console with the screws and the dowels at the wall. Let a specialist make the electric connec-
tions according to figures 5-7. Knock out the prepunched hole at the provided cable bushing and press in
the cable bushing sockets – Turn up the cover and fix its position with the two screws - Place the
appliance that way so the heat is radiated into the desired direction.
Operation of the appliance
Turn on/off the appliance by means of the circuit breaker. If you use the appliance with a series switch,
you can select between the heating levels full and medium.
Cleaning the device
- Disconnect the appliance via the all-polo disconnecting switch (fuse) and let it cool down.
- When needed, wipe the device with a slightly damp cloth.
- To remove dust from the reflector and heating elements you can use a brush with long soft bristles.
- When the device is heavily contaminated, get it cleaned by an expert.
Possible faults and causes
If you have tried all the above and the appliance still does not work, please refer to your dealer or a service
centre.
Maintenance
The device is maintenance-free.
Disposal
For the safe and environmentally-friendly disposal of the appliance, please contact your dealer or the man-
ufacturer.
Fault Cause Remedy
The heating
elements do
not radiate
any heat.
The device is turned off. Turn on the appliance.
The relevant household fuse has blown or
the circuit breaker has been activated.
Check the fuse / circuit breaker and make
sure that no other high power devices share
the same fuse / circuit breaker.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AKO UWS 75 RD-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AKO UWS 75 RD-1 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info