Manual AKO H 260-4 (page 4 of 12) (English, German, Dutch, French, Italian, Spanish)

520602

Zoom out

Zoom in

1/12

Glen Dimplex Deutschland GmbH h2604-en_ba 03/09/A

Am Goldenen Feld 18, D-95326 Kulmbach

www.glendimplex.de

kundendienst.hauswaerme@glendimplex.de

5. Heating operation

All Models

The room temperature is regu-

lated using the adjustable ther-

mostat (A). If the rotary knob is

set to the lowest setting i.e. to

the extreme left (see figure), the

thermostat switches the heater

on at an ambient temperature

of approx. 5°C.

Note!

Rooms can become overheated if left unattended whilst being

heated; this depends on the size of the room, its heating re-

quirements and the setting of the thermostat. Persons who are

not able to vacate the room if the temperature becomes too

high can thus be placed in danger.

Models with 60-minute timer

Turn the timer knob (B) in a clockwise direction. Set the desired

time period (up to 60 minutes).

During the time set, the device

runs at its full output of 2000 W.

When the set time has expired,

the device switches to a lower

(1000 W) heating level. Both le-

vels are controlled by the ther-

mostat.

The set time can be changed or

reversed at any time using the

timer knob (B).

Models with 24-hour timer

The operating hours of the heater can be set in a day program

(24 hours) using the timer.

For automatic operation, slide the switch (C) to the right into

"clock" position.

Setting the time:

Turn timer (D) clockwise until the marking matches up to the

current time.

Heater ON Slide segments outwards.

Heater OFF: Slide segments inwards.

Each segment represenets a switch-on or switch-off time of 20

minutes. In order, for example, to set a switch-on time of one

hour, 3 segments are slid outwards.

The timer can be programmed

for several ON/OFF phases of

different lengths. The thermo-

stat provides a uniform room

temperature during the switch-

on time.

Outside of the switching time, no

heating operation - and thus no

frost protection - takes place.

Manual OFF Timer

Operation via the timer can be deactivated at any time by swit-

ching to "Manual" or "0" (OFF).

The timer only runs when the device is connected to the power

supply.

6. Protection Against Overheating

If the permissible temperature is exceeded, the heater swit-

ches off automatically. If this occurs, pull the mains plug out

and leave the device unplugged for a few minutes, so that the

temperature limiter can switch back again.

Then remove the cause, e.g. when the air grid is blocked or co-

vered. When the device has cooled sufficiently, it can be star-

ted up again.

7. Faults

If the heater does not give off heat, check the following points:

• Has the thermostat been set to the desired temperature?

• Has the overheat protection been triggered? See chapter 6!

• Is the fuse in the fuse box switched on?

• Models with 24-hour timer: Set the slide switch and seg-

ments correctly.

If the fault cannot be corrected, please contact a specialist

electrical service center or else your nearest after-sales ser-

vice.

To process your order, please state the production number

(E No.) and manufacturing date (FD) of the device. This infor-

mation is listed on the type plate.

The device must only be repaired or manipulated by a skilled

electrician or the after-sales service.

8. Cleaning

To clean the device, first disconnect it from the mains and allow

it to cool down. Clean the outside of the unit using a soft, damp

cloth. Do not use scouring powder or furniture polish as this

may damage the surface. Dust which gathers inside the device

can be removed from the outside using a vacuum cleaner.

9. Warranty

This product is supplied with a two-year warranty according to

our terms of guarantee.

10. Note on Disposal

Do not dispose of the unit with general household

waste. The device must be taken to a local waste

disposal plant.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AKO H 260-4 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AKO H 260-4 Manual

Product: