520581

AKO BK 2001 Manual

4
Zoom out
Zoom in
Previous page
1/12
Next page
4
Glen Dimplex Deutschland GmbH bk bs-en_ba 06/09/B
Am Goldenen Feld 18, D-95326 Kulmbach
www.dimplex.de
kundendienst.hauswaerme@dimplex.de
EN
3. Operation
Do not use the device as a chan-
ging table heater!
The radiator heats the objects or
persons upon which/whom it is
directed without also directly
heating the indoor air.
The radiator can be tilted down-
wards by a maximum of 40°.
Caution! Adjustments may only
be made when the device is fully
cooled. Danger of burns!
The desired heating level can be
set by pulling the cord switch
once or repeatedly.
The set heating level can be read
in the display window.
In position 0, the heating device
is switched off.
W = output power in watts.
4. Faults
If the heating device does not give off heat, check the following
points:
• Is the display at “0”?
• Is the fuse in the fuse box switched on?
If the fault cannot be corrected, please contact your electrical
retailer.
If necessary, you can also call the Glen Dimplex Deutschland
service hotline.
Tel.: +49 (0) 9221 709-564
Fax: +49 (0) 9221 709-589
To process your order, the device type, the production number
(E number) and the device’s production date (FD number) are
required. These specifications can be found on the device’s
type plate. Repairs and corrective measures must only be car-
ried out by a qualified electrician or the after-sales service.
5. Cleaning
Switch off the device and let it cool down before cleaning it.
Caution! Do not touch the reflector or heating element with bare
hands.
The outer surfaces of the device can be cleaned with a damp
cloth and then dried thoroughly.
No scouring agents or polishes should be used.
Dust which gathers inside the device can be removed using a
brush with soft, long bristles.
If the device is heavily soiled, it should be cleaned by a specia-
list.
6. Changing the Heating Element
A heating element may only be changed by a specialist.
Disconnect the device from the power supply and allow it to
cool.
Do not touch the heating element or reflector with bare hands.
Use a cloth to protect the surface.
- Loosen the front grill screws (A) and remove the front grill.
- Remove push-on connections using a suitable tool.
- Pull out the two fixing brackets (B).
- Remove the heating element.
- Insert new heating element.
Carry out assembly in reverse order.
7. Technical Data
Connection voltage: 1/N/PE 230 V~
Degree of protection: IP24 (splash-proof)
Protection class: I (with protective conductor)
8. Warranty
This product is supplied with a two-year warranty according to
our terms of guarantee.
9. Note on Disposal
Do not dispose of the unit with general household
waste. The unit must be taken to a local waste dispo-
sal plant.
Type Display 0 Display 1 Display 2 Display 3
BK 1201 Off 1200 W
BK 2001 Off 800 W 1200 W 2000 W
BS 1201 Off 600 W 1200 W
BS 1801 Off 600 W 1200 W 1800 W
BK 1201 BK 2001 BS 1201 BS 1801
Nominal
power
1,2 kW 2,0 kW 1,2 kW 1,8 kW
Dimen-
sions
(W x H x D)
768 x 100 x 92 mm 526 x 140 x 92 mm
Weight 1.60 kg 1,70 kg 1,55 kg 1,65 kg
B
A
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AKO BK 2001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AKO BK 2001 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 6,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info