630522
4
Zoom out
Zoom in
Previous page
1/48
Next page
4
Rec Perf: Press this button to enter Record Performance Mode. See the Record
Performance Mode section of this guide to learn more. When holding Shift, the Step
Indicator above this button is lit when in this mode.
Rec Off: Press this button to deactivate recording (Record Off Mode). See the Record
Step Mode and Record Performance Mode sections of this guide to learn more.
When holding Shift, the Step Indicator above this button is lit when in this mode.
MIDI Out/Thru, MIDI Sync: Press this button to switch between the Out and Thru
functions of Tom Cat’s MIDI Out/Thru jack. The display will indicate which is
currently selected:
When set to Out, Tom Cat will send its own MIDI messages to its MIDI Out/Thru jack
and to its USB Port.
When set to Thru, MIDI messages received through the MIDI In will be sent to the
MIDI Out/Thru. Tom Cat’s messages will be sent to its USB Port.
Sync: Press this button to select Tom Cat’s MIDI clock source: Internal, External,
USB, or Gate. See the Transport Control section to learn more.
Copy, Clear, Save: Use these buttons to copy, clear, or save the current pattern. See
the Saving, Copying, and Clearing section to learn more.
6. Step Indicators: These LEDs will light up to indicate various states:
In Record Step Mode, they show which steps contain a note (i.e., which Step Switches
are active). See Record Step Mode to learn more.
While holding down the Velocity button in Record Step Mode, their colors show the
velocity of each step. See Record Step Mode to learn more.
While selecting a pattern, the red Step Indicator shows which pattern is currently
selected. See About Patterns to learn more.
In Record Performance Mode or Record Off Mode, they show the current position in
the Sequence.
7. Pads: Press these pads to perform the following functions:
In Record Step Mode, press a pad to show (and edit) that voice in the Step
Switches. See Record Step Mode to learn more.
In Record Performance Mode, press the pads to record their sounds in the current
Sequence in real time. See Record Performance Mode to learn more.
In Record Off Mode, press the pads to play their sounds without recording them.
8. Voice Controls: Use these controls to adjust the sounds of their respective voices.
Kick Drum: The kick drum voice.
o Volume: Turn this to set the kick drum’s volume.
o Tune: Turn this to tune the pitch of the kick drum.
o Pitch Envelope: Turn this to set how long it takes for the kick drum oscillator to
return to its original pitch. (At the beginning of the kick drum sound, the pitch
envelope bends the pitch upward and then back down to the original pitch. This
Pitch Envelope knob helps you create a shorter, more aggressive and
percussive sound or a longer, more resonant, descending “boom” sound.)
o Decay: Turn this to set the decay time of the kick drum’s amplitude envelope.
Snare Drum: The snare drum voice.
o Volume: Turn this to set the snare drum’s volume.
o Tune: Turn this to tune the “body” of the snare drum. This affects mostly the
tone of the drum sound but not the noise (the “snare” sound).
o Filter: Turn this to set the cutoff frequency of the snare drum’s high-pass filter.
o Decay: Turn this to set the decay time of the snare drum’s amplitude envelope.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai Tom Cat at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai Tom Cat in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 6,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info