630521

Akai Timbre Wolf Manual

6
Zoom out
Zoom in
Previous page
1/64
Next page
6
Rear Panel
12 13
1011
1
2
3
5
6
8
9
7777
4
1. DC In: Use the included power adapter (12V, 2A, center-positive) to connect this jack to a
power outlet.
2. Power Button: Press this button to power Timbre Wolf on or off.
Important: After powering Timbre Wolf on, let it warm up before using it. Its tuning can be
affected by the temperature.
3. Cable Restraint: You can secure a cable to this restraint to prevent it from accidentally
unplugging.
4. Kensington
®
Lock Slot: You may use this Kensington lock slot to secure the Timbre Wolf
to a table or other surface.
5. USB Port: Use a standard USB cable to connect this port to an available USB port on
your computer. This connection lets Timbre Wolf send and receive MIDI over USB to and
from your computer.
6. Main Out: Use a standard 1/4” (6.35 mm) TRS or TS cable to connect this output to the
input of an audio interface, mixer, amplifier system, etc.
7. Voice Outs 1–4: Use standard 1/4” (6.35 mm) TRS or TS cables to connect these outputs
to the inputs of an audio interface, mixer, amplifier system, etc. Each Timbre Wolf voice is
sent separately to each of these outputs, so you can record or mix them independently of
each other. When a cable is connected to one of these outputs, that voice will be removed
from the Main Out and Phones Out. The Howl knob does not affect these outputs.
8. Phones Out: Connect your standard 1/4” (6.35 mm) stereo headphones to this output.
9. MIDI In: Use a standard five-pin MIDI cable to connect this MIDI In to the MIDI Out of an
external MIDI device (e.g., another MIDI controller).
10. MIDI Out: Use a standard five-pin MIDI cable to connect this MIDI Out to the MIDI In of an
external MIDI device (e.g., a synthesizer, sequencer, drum machine, etc.).
11. MIDI Thru: Use a standard five-pin MIDI cable to connect this MIDI Thru to the MIDI In of
an external MIDI device (e.g., a synthesizer, sequencer, drum machine, etc.). All messages
sent from this MIDI Thru are identical to the messages received by Timbre Wolf’s MIDI In.
12. Gate Trig Out: Use a standard 1/8” (3.5 mm) TS cable to connect this output to the input
of an optional external device that can receive Timbre Wolf’s Gate (trigger) messages.
13. Gate Trig In: Use a standard 1/8” (3.5 mm) TS cable to connect this input to the output of
an optional external device to send Gate (trigger) messages to Timbre Wolf.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai Timbre Wolf at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai Timbre Wolf in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 7,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info