496641

Akai professional MAX49 Manual

11
Zoom out
Zoom in
Previous page
1/88
Next page
11
SEQUENCER
[SEQ SELECT]: The first two pages of this
section (Pg1 and Pg2) pertain to specific
Sequences (1-4), as indicated at the top of the
LCD. The rest of the pages pertain to the
Sequencer in general. So the first two pages'
settings may vary between the four Sequences,
but the rest will be the same for all Sequences.
Steps: The number of steps used by the Sequencer. The available range is 01-32 steps.
MIDI Channel: This setting determines over which MIDI channel data is sent. The available settings
are Common, USB A1-A16, and USB B1-B16.
MIDI to DIN: Determines whether or not MIDI data is sent to the MIDI OUT (On) or not (Off). MIDI data
will be sent to MAX49's USB connection regardless of this setting.
Keyshift: When Keyshift is set to On, you can transpose the Sequence in real time (as it is playing) by
pressing a key on the keyboard once, which will "latch" it to that new transposition. When Keyshift is set
to Off, you can only transpose the Sequence by holding down a key; it will return to the Default Key
when the key is released.
Default Key: The default key of the Sequence.
Scale: The scale used by the Sequencer. When a scale other than Chromatic is selected, the faders
will be limited to selecting only the notes available in the scale, which can be useful for avoiding
unintentionally out-of-key notes! The available settings are Chromatic, Major, Dorian, Phrygian, Lydian,
Mixolydian, Minor, Locrian, Minor Melo (Melodic Minor), Minor Harm (Harmonic Minor), PentaMajor
(Major Pentatonic), PentaMinor (Minor Pentatonic), Blues, AlteredDom (Altered Dominant), DimWhlHalf
(Diminished Whole-Half-Step), and Whole-Tone.
Start / Stop: This determines what message will start/stop the Sequencer. The available settings are:
• Note On / Note Off: The Sequencer will play when [SEQ ON/OFF] is activated and a key on the
keyboard is pressed. If Keyshift is On, the Sequence will be automatically transposed to that key.
• Seq On/Off: The Sequencer will play when [SEQ ON/OFF] is pressed.
• Play / Stop: The Sequence will play when Play () is pressed and stop when Stop () is
pressed.
[SEQ NOTE]: This is a representation of the steps in a Sequence. Use the CURSOR buttons to navigate
through the "grid" format.
Step: The step number.
Note: The note being played for that step. You can also set the note by touching the TOUCH FADERS.
Velo: The velocity of the note being played for that step.
[SEQ CC]: This is a representation of the steps in a Sequence. Use the CURSOR buttons to navigate
through the "grid" format.
Step: The step number.
Value: The value being sent for that step.
CC Number: The MIDI CC# being sent.
TRANSPORT CONTROLS
Type: The type of event that will be sent. The available settings are MMC, MMC/MIDI, MIDI Real Time, MIDI
CC, Mackie, and HUI.
MIDI to DIN: Determines whether or not MIDI data is sent to the MIDI OUT (On) or not (Off). MIDI data will
be sent to MAX49's USB connection regardless of this setting.
Note: You can select the Sequence to edit by using
the pads. Hold down [SEQ SELECT] then press
one of the bottom four pads to select that Sequence
(the number is printed on the left-hand side above
the
p
ad – 1-4
)
.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai professional MAX49 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai professional MAX49 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info