630545

Akai MPX8 Manual

6
Zoom out
Zoom in
Previous page
1/36
Next page
6
To adjust the parameters of a pad:
1. Use the Select +/– buttons to highlight the desired
parameter name.
2. Use the Data Dial to adjust the parameter value.
The adjustable parameters are described below:
Tuning TUNE
The pitch adjustment of sample assigned to the pad, in
semitones. The lowest possible tuning is -4, and the highest is
4. At 0, the pad will play the sample back at its normal pitch.
Reverb REV
The amount of reverb applied to the sample assigned to the
pad. The lowest amount is 0 (no reverb), and the highest is 10
(maximum reverb).
Trigger TRIG
How the sample plays back when triggered by the pad. When
set to One-Shot (1SH), pressing the pad will play the entire
sample.
When set to Hold (HLD), pressing and holding the pad will play
the sample until you release the pad. If you are still holding the
pad when it reaches the end of the sample, it will loop back to
the beginning, looping it continuously until you release the pad.
When set to Loop (LP), pressing the pad will play the sample,
looping it continuously until you press the pad again.
Level LEV
The volume level of the sample assigned to the pad. The
quietest value is 0 (silent), and the loudest is 10.
Panning PAN
The left-right balance of the sample assigned to the pad. The
left-most value is L4, the right-most value is R4, and the center
is CTR.
MIDI Note Number MID
The MIDI note message sent out when you press the pad. The
available values are 000 – 127. This value does not affect the
sample assigned to the pad; it changes the MIDI note message
sent out MPX8's MIDI Out port and the MIDI note message
MPX8 recognizes sent into its MIDI In port.
Saving Kits
If you change the currently selected Kit (in the KIT field), you will lose any changes you have made
unless you save it first.
To save the currently selected Kit:
1. Press Select + and Volume + simultaneously. The Display will ask if you want to save the
current Kit.
2. Press the Volume + button (Yes) to save the kit or the Volume – button (No) to cancel.
Please note: Saving a kit will overwrite all the pad assignments, parameters, etc. since the last
time you saved it.
To copy and save the current Kit's settings to a new User Kit:
1. Make sure an SD card is inserted into the SD Card Slot.
2. Press Select – and Volume – simultaneously. The Display will ask if you want to save the Kit to
a new Kit.
3. Press the Volume + button (Yes) to save the kit or the Volume – button (No) to cancel. MPX8
will save the Kit to the next available User Kit number (e.g., if you have 12 User Kits already
saved on the SD card, the next User Kit will be e13).
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai MPX8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai MPX8 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info