630552

Akai MPK88 Manual

19
Zoom out
Zoom in
Previous page
1/44
Next page
16
MIDI PORT/CHANNEL FIELD
CONTROL CHANGE FIELD
MINIMUM RANGE FIELD
MAXIMUM RANGE FIELD
CONTROL CHANGE PARAMETERS
The following list of parameters can be accessed if the pad event type is set to “Note”.
MIDI CHANNEL FIELD
This field sets the MIDI Port and Channel which the knob or fader will use to
transmit messages. You can assign knobs and faders to one of two MIDI Ports,
A or B, and to one of 16 MIDI Channels on each port (i.e. A14). You can also
assign a knob or fader to use the MIDI Common Channel.
1. Use the [<] button to select MIDI Port/Channel field.
2. While in MIDI Port/Channel field, use [VALUE] dial to select desired MIDI
Port and Channel.
3. Use the [>] button to select the next field.
Note: When not used via USB, only knobs and faders assigned to port A will be
transmitted via the 5-pin MIDI port on the back of the MPK61/MPK88.
CONTROL CHANGE FIELD
In this field you can set which Control Change Number the pad will transmit
when it is pressed.
1. Use [<] or [>] buttons to select Control Change field.
2. While in Control Change field, use [VALUE] dial to select desired Control
Change Number.
3. Use the [>] button to select the next field.
Note: To be able to control a parameter in your DAW or sound module with a
knob or fader, both the parameter and the knob need to be set to the same
Controller Number.
MINIMUM RANGE FIELD
This field is used to specify the minimum value that the knob or fader can
output.
1. Use [<] or [>] buttons to select Minimum Range field.
2. While in Minimum Range field, use [VALUE] dial to select desired minimum
value.
3. Use the [>] button to select the next field.
Tip: Sometimes you might not want the full 0-127 range of control that a fader
automatically defaults to. Often, reducing the value range of the fader might
actually give you more precise control over the parameter it is controlling. For
example, if you are using one of the faders to control a synced delay line, there
might only be about 10 available values for the sync delay time (1/2, 1/4, 1/8
note, etc.). Therefore, it wouldn’t make much sense to have the fader transmit
the full 128 MIDI control values, since that only gives you a tenth of the full fader
range. Instead, try setting the maximum value of the fader to 10.
MAXIMUM RANGE FIELD
This field is used to specify the maximum value that the knob or fader can
output.
1. Use the [<] or [>] buttons to select Maximum Range field.
2. While in Maximum Range field, use [VALUE] dial to select desired maximum
value.
Tip: Setting the maximum value of a controller lower than the minimum value
will cause the knob or fader to behave inversely. For example, it may be more
intuitive to invert your faders if you are controlling an interface or plug-in that
operates with a drawbar structure, such as organ instruments.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai MPK88 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai MPK88 in the language / languages: English as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Akai MPK88

Akai MPK88 Quick start guide - English, German, French, Italian, Spanish - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info