630553
35
Zoom out
Zoom in
Previous page
1/44
Next page
32
EDITING SPLIT
Split Mode allows you to divide the MPK61/88's keyboard into two sections, each controlling a different set of
sounds simultaneously – a useful performance feature.
To activate or deactivate Split Mode on the keyboard, press [SPLIT]. The [SPLIT] button's LED will be lit
when Split Mode is active.
The selected key and every key below it is considered Section "A." Every key above it is Section "B."
You can set the "Split Point" (the dividing point on the keyboard) by simply holding down the [SPLIT]
button and pressing the desired key on the keyboard.
You can also set the Split Point in Edit Mode:
1. Press [EDIT] to enter Edit Mode.
2. Press [SPLIT] to select that as the control to edit. The LCD will
show "Set SPLT" on Page 1 (shown on the left). Use the [VALUE]
dial to select "NOTE" and press [ENTER] to select it.
3. Press a key on the keyboard to set where the Split Point will be.
The LCD will show that key's note number. (Alternatively, you can
use the [VALUE] dial to select the note number and press [ENTER]
to confirm your choice.)
While in Edit Mode, you can edit other parameters for the two
independent sections of the keyboard.
1. Press [EDIT] to enter Edit Mode.
2. Press [SPLIT] to select that as the control to edit. The LCD will
show "Set SPLT" on Page 1. Use the [VALUE] dial to select a
parameter and press [ENTER] to select it:
PITCH (pitch bend wheel): ON or OFF
MODWHEEL (modulation wheel): ON or OFF
SUSTAIN 1 and SUSTAIN 2 (sustain pedals): ON or OFF
EXPRESSION (the expression pedal): ON or OFF
ARP (arpeggiator): ON or OFF
MIDI CH (MIDI channel): CC, 1-16A, 1-16B
AFTERTOUCH (aftertouch): ON or OFF
3. For each parameter, use the [<] and [>] buttons to toggle between
the fields for Sections A and B. Use the [VALUE] dial to select a
setting and press [ENTER] to accept the change or [<] to cancel.
You can also set the MIDI channel over which the notes will be sent.
Section A will always be sent over the common channel, which can
be selected in Global Mode. You can set Section B (shown on the
left) to send over 1-16A, 1-16B, or the common channel ("CC"). Use
the [VALUE] dial to select the channel. Press [ENTER] to accept
the change or [<] to cancel.
SPLIT POINT
SPLIT PARAMETERS
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai MPK61 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai MPK61 in the language / languages: English as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Akai MPK61

Akai MPK61 Quick start guide - English, German, French, Italian, Spanish - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info