630554
12
Zoom out
Zoom in
Previous page
1/76
Next page
12
NAVIGATING GLOBAL MODE
1. Press the [GLOBAL] button.
2. Use the [<] and [>] buttons to navigate through the available pages of
options (shown below).
3. Use the [VALUE] dial to change settings, values or select a message
on the selected page.
4. Press [ENTER] to accept the change or send a message or press [<]
NAVIGATING PROGRAM CHANGE MODE
1. Press the [PROGRAM CHANGE] button.
2. On Page 1, use the [VALUE] dial to select a Prog Change or
Prog+Bank message on and press [ENTER].
3. On Page 2, use the [<] and [>] buttons to move through the
different options and use the {VALUE] dial to change them.
4. Press [ENTER] to send the message.
GLOBAL MODE
In Global Mode, you can send
global messages and make general
changes to the way that your
MPK49 functions. Global Mode
options are organized under
different pages and include the list
of options shown below.
KILL MIDI
Send an All Notes Off or Reset Controllers message Page 1
MIDI COMMON CHANNEL
Select which MIDI channel will be used as the
Common Channel.
Page 2
LCD CONTRAST
Adjust the contrast of the display. Page 3
PAD SENSITIVITY
Adjust how sensitive the pads are to the touch. Page 4
PAD VELOCITY CURVE
Adjust how the pads will output MIDI velocity, based
on the force applied to them.
Page 5
PAD THRESHOLD
Adjust the threshold of minimum force required to
activate a pad.
Page 6
KEYBOARD TRANSPOSITION
Transpose the keyboard up or down in semitones. Page 7
MIDI CLOCK
Select Internal or External MIDI Clock source. Page 8
TAP TEMPO AVERAGE
Select the number of taps to be averaged in
determining tempo.
Page 9
SAVE SETUP
Save the current global settings. Page 10
SYSEX TX
Transfer a Preset via SysEx. Page 11
VERSION
Check the current firmware version. Page 12
PROGRAM CHANGE MODE
A Program Change, often referred to as a
Patch Change, is a MIDI message used for
sending data to devices to cause them to
change to a new program. This allows you
to tell a hardware or software device which
sound to play. For example, if your MPK49
is controlling a piano patch on your DAW or
an external device, using a Program Change
command allows you to easily switch to a
synth patch.
There are two different types of Program Change messages on the MPK49:
PROG CHANGE – This event will transmit a regular Program Change message (0-127) to your DAW or an
external device, allowing you to switch between 128 different program banks.
PROG+BANK – This event transmits a Program Change message (0-127), along with a Bank L (Least
Significant Bit) Change message (0-127) and a Bank M (Most Significant Bit) Change message (0-126),
which allows access of up to 16384 different program banks. You can use PROG+BANK if your DAW or
external device supports LSB and MSB.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai MPK49 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai MPK49 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Akai MPK49

Akai MPK49 User Manual - English - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info