630216
24
Zoom out
Zoom in
Previous page
1/32
Next page
22
PAD VELOCITY CURVE FIELD
MIDI VELOCITY
WEAK
STRENGTH OF HITTING
PAD
STRONG
MIDI CLOCK FIELD
PAD THRESHOLD FIELD
PAD VELOCITY CURVE – Page 5
A PAD VELOCITY CURVE describes how the pads on the MPD26 are
outputting MIDI velocities, based on a certain ratio of the input / output
velocity that characterizes the particular curve. The Pad Velocity Curve
feature is intended to help you optimize the pads on the MPD26 for
your particular playing style and can add expressivity and control to
your performance. If you find it difficult to achieve a comfortable
velocity range for your playing style (you cannot get a velocity of 127
even if you hit the pad very hard, or vice versa, you get velocity 127
easily even if you hit the pad softly) you can adjust the velocity curve as
desired.
1. While in Global Mode, press [>] to scroll to PadCurve (page 5).
2. Turn [VALUE] dial to change the Pad Velocity Curve (the 4
curves are shown below).
3. Press [ENTER] to set Pad Velocity Curve.
PAD THRESHOLD – Page 6
PAD THRESHOLD is the minimum force required to activate the pads.
If you experience “ghost” triggering due to stage vibrations, you may
wish to set this threshold higher. On the other hand, if you find it
difficult to trigger sounds when playing the pads lightly, you may wish to
set this value to a lower number.
1. While in Global Mode, press [>] to scroll to PdThresh (page 6).
2. Turn [VALUE] dial to select value.
3. Press [ENTER] to set Pad Threshold.
MIDI CLOCK – Page 7
MIDI CLOCK is used to synchronize devices together. In addition,
MIDI Clock on the MPD26 is used to synchronize the Note Repeat
feature. The MPD26 can be a master or slave for MIDI Clock
transmission and reception.
1. While in Global Mode, press [>] to scroll to MIDI CLK (page 7).
2. Turn [VALUE] dial to select “Internal” if you would like to generate
MIDI Clock internally or “External” if you would like to slave the
MPD26 to an external MIDI Clock source.
3. Press [ENTER] to set MIDI Clock source.
Note: If “External” has been selected as a MIDI Clock source, the
[TAP TEMPO] button will be disabled.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai MPD26 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai MPD26 in the language / languages: English as an attachment in your email.

The manual is 1,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info