630216

Akai MPD26 Manual

9
Zoom out
Zoom in
Previous page
1/32
Next page
7
ENTER PRESET NAME IN
THIS FIELD
PRESET NAME PRESET NUMBER
PRESET MODE
The MPD26 features different Preset banks which you can load and write to. When you turn on the MPD26,
it will automatically go into Preset Mode and Preset 1 will be displayed on the screen. You can also press
the [PRESET] button at any time to call up this mode. In Preset Mode you can load, save/copy and rename
Presets – each of these functions can be accessed through the 3 different pages. You can navigate between
these pages with the [<] and [>] buttons.
LOAD PRESET – Page 1
1. While you are in Preset Mode, you can change Presets with the
[VALUE] dial below the screen. Turning the dial increments or
decrements the current Preset number and displays the screen on
the right:
When you do this, you will notice that ‘PRESS ENTER’ will begin to
blink.
2. Pressing [ENTER] loads the selected Preset. Pressing [<] or
[PRESET] cancels and returns you to the Preset that was last
selected.
SAVE / COPY PRESET – Page 2
In Preset Mode, you can also save and copy a Preset to a new location.
This allows you to save any changes that you would have made to the
Preset in EDIT MODE.
Note that if you are saving the Preset to the same location (same preset
number) the screen will display ‘SAVE TO’ and if you are saving to a
different location (different preset number), the screen will display ‘COPY
TO’.
1. While you are in Preset Mode, press [>] until you see the ‘SAVE TO’
screen similar to the one shown above.
2. You can select the location where you want to save the Preset by
turning the [VALUE] knob.
When you do this, you will notice that ‘PRESS ENTER’ will begin to
blink.
3. Press [ENTER] to save current Preset to the destination. Pressing
[<] or [PRESET] cancels the operation.
NAME PRESET – Page 3
While you are in Preset Mode, you can also change the Preset name. This
way you can assign specific names to different Presets so you can better
keep track and quickly access different controller configurations.
1. To name or rename the Preset, press the [>] button until you see
‘Preset Name’ displayed on the screen.
You will notice that the first letter of the name will begin blinking.
2. Turn the [VALUE] dial to change the blinking character.
3. To move between the characters, use [<] and [>].
4. When done, press [PRESET] again. The name will be saved.
DESTINATION
What is a Preset?
A Preset is a collection of information about how the MPD26’s faders,
knobs and pads will behave. Using Presets allows you to save different
configurations so you can quickly load them when you need them, without
having to reprogram the MPD26 every time.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai MPD26 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai MPD26 in the language / languages: English as an attachment in your email.

The manual is 1,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info