630578
113
Zoom out
Zoom in
Previous page
1/120
Next page
106 Chapter 16: Other settings
MPC500 Operator's Manual rev 1.0
Initialize To Factory Default
Various Sample and Sequence settings can be saved to Compact Flash when the file is saved. The global settings found in the MPC500
(listed below) are saved to the internal Flash Memory and stored when the MPC500 is turned off. You can re-initialize the Factory Preset
settings using the following procedure.
1. Turn the MPC500 on while holding the [ERASE / UNDO] button.
2. Release the [ERASE / UNDO] button after the display shows [MPC500 (##MB installed)].
Now the MPC500 is reset to the Factory Preset settings. The following global settings are stored in the MPC500:
Timing Correct (Note value, Swing%)
Click/Metronome (Count in, Rate, In play, In rec)
Step Edit Options (Auto step increment, Duration of recorded notes)
Active track receive channel
Soft thru
Sync in
Sync out
Master level
Sustain pedal to duration
Truncate dura
Tap average
Autoload
Version
The MPC 2500’s operating system is upgradeable and allows us make changes to existing features after it has left the factory floor. To
make sure you have the latest version of the OS, you can check the version of the OS in Other mode.
To confirm you have the latest operating system, check the support section of http://www.akaipro.com
.
How to Upgrade the MPC500
IMPORTANT: THIS UPDATE PROCEDURE WILL ERASE ALL USER DATA. Please save all of your songs, patterns, and samples to a
CF card or to your computer using USB before proceeding.
1. Save the new OS file from the website to the ROOT of the CF card using your computer.
2. Insert the CF with OS data into MPC500.
3. Turn the power on while holding down the [SHIFT] button.
4. When prompted by the display, press the REC button. The MPC500 will start the update procedure.
5. Because of all the new features and parameters, it will be necessary to re-initialize the MPC500 after the upgrade
procedure is complete. To do so, turn the MPC500 off, hold down the Erase button, and turn the unit back on.
113


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai MPC500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai MPC500 in the language / languages: English as an attachment in your email.

The manual is 3,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Akai MPC500

Akai MPC500 Quick start guide - English, German, French, Italian, Spanish - 53 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info