630578
110
Zoom out
Zoom in
Previous page
1/120
Next page
103
MPC500 Operator's Manual rev 1.0
Chapter 15 Connecting the MPC500 to
your computer
The MPC500 supports the USB mass storage class. When you connect the MPC500 to a PC that supports USB mass storage class, the PC
will recognize the memory card in the MPC500 as a removable media drive. You can transfer the data between the recognized memory card
and the PC. You can save the data on the memory card to the PC, or you can load the data from the PC to the memory card.
You need Windows 2000/Me/XP or later, or Mac OS 9.x/10.x or later version.
Note: The computer cannot recognize the MPC500's internal memory directly. To save the data in the internal memory to the computer,
you need to save the data to the memory card first. Also, the data from the computer will be saved to the memory card. To use the data in
the MPC500, load the data from the memory card.
Windows 2000/Me/Xp
1. In the 'Type' field of either the Save or Load page, choose USB.
This brings up the USB page, which you use to connect the MPC500 to the PC.
2. Connect the MPC500’s USB slave jack to the PC’s USB host jack via USB cable. The screen on the MPC500 will
change as follows:
3. When you connect the MPC500 to the PC for the first time, the message, "Found New Hardware" will be displayed.
Follow the instruction on the display.
Once the PC recognizes the MPC500, its "Removal" icon will be displayed in the task bar. In the Device Manager, the MPC500 will be
displayed as a USB Mass Storage Device.
In My computer, the MPC500 is displayed as a removable disk.
4. To save the data to a PC, select the data and drag and drop it from the removable disk to the hard disk. To load the
data, select the data and drag and drop it from the hard disk to the removal media.
5. When you finish the data transfer, click the "Removal" icon on the PC’s task bar and select the "Stop USB Mass
Storage Device - Drive (:)".
Note: In the "(:)", a drive letter is displayed, which indicates the drive in the PC.
When you select to stop the device, the "'USB Mass Storage Device is ready to remove safely" dialog box will be displayed.
6. Remove the USB cable from the USB jacks of the MPC500 and the PC.
Note: Make sure that you do Step #5 "Remove the device" before disconnecting the USB cable.
Note: You can transfer the data between the MPC500 and the PC only when the USB page is displayed. You can not move to another page
or mode from USB page unless you disconnect the USB cable.
Macintosh
Insert the memory card to the MPC500’s card slot.
1. In the 'Type' field of either the Save or Load page, choose USB.
This brings up the USB page, which you use to connect the MPC500 to the PC.
110


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai MPC500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai MPC500 in the language / languages: English as an attachment in your email.

The manual is 3,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Akai MPC500

Akai MPC500 Quick start guide - English, German, French, Italian, Spanish - 53 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info