630577
93
Zoom out
Zoom in
Previous page
1/136
Next page
MPC2500 Operator’s Manual rev 1.0
83
The functions in the Program
window
Pressing the [WINDOW] key in the Pgm field brings up the
Program window. In the Program window, you can edit the
setting for the selected program.
Changing the program name
01. In the Pgm field of the PROGRAM page, select a
program that you wish to change the name of.
02. Press the [WINDOW] key.
The Program windows will open.
03. In the Program name field, enter the new name.
For more information for setting the name, see the
“Setting names” section on Page 10.
04. Press [F4] (CLOSE) key.
It closes the window and goes back to PROGRAM mode.
Copying a program
You can copy a program to make a new program.
01. In the Pgm field in PROGRAM mode, select the pro-
gram that you wish to copy.
02. Press the [WINDOW] key.
The Program window will open.
03. Press [F5] (COPY) key.
The Copy Program window will open.
04. In the New name field, set the name for the new
program.
For more information regarding setting the name,
see the “Setting names” section on Page 10.
05. Press [F3] (DO IT) key.
Copying the program will start. To cancel the op-
eration, press [F4] (CANCEL) key instead.
Deleting a program
You can remove a program from the memory of the MPC2500.
01. In the Pgm field in PROGRAM mode, select the pro-
gram that you wish to delete.
02. Press the [WINDOW] key.
The Program window will open.
03. Press [F2] (DELETE) key
The Delete Program window will open.
04. Press [F5] (DO IT) key.
This deletes the selected program.
Deleting all programs
You can delete all the program data in the memory at
the same time.
01. In the PROGRAM mode, select the Pgm field and
press the [WINDOW] key.
The Program window will open.
02. Press [F2] (DELETE) key.
The Delete Program window will open.
03. Press [F3] (ALL PG) key.
The Delete ALL Programs window will open.
04. Press [F5] (DO IT) key.
This deletes all the programs.
Setting the program change number
You can switch the programs assigned to a track within
the sequence by setting the program change numbers in
each program. You do not have to set the program change
numbers if you do not need to switch the programs. To
switch the programs, program change events are used.
You can enter these events in the STEP EDIT mode.
For more information about entering the program change
events, see the “Step editing” section on page 31.
01. In the Pgm field of the PROGRAM mode, press the
[WINDOW] key.
The Program window will be displayed.
02. Select the MIDI program change field and set the
program change number.
If a track has a program change event with the same
number set in this field, the MPC2500 switches the
program at the event while playing back the se-
quence. If you do not wish to switch the program
during the playback, set this field to OFF.
93


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai MPC2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai MPC2500 in the language / languages: English as an attachment in your email.

The manual is 12,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Akai MPC2500

Akai MPC2500 Quick start guide - English, German, French, Italian, Spanish - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info