630577
88
Zoom out
Zoom in
Previous page
1/136
Next page
78 Chapter 13: PROGRAM
MPC2500 Operators Manual rev 1.0
Chapter 13 : Program
In this section, you will learn how to edit a program. This is done in the PROGRAM mode, which can be accessed by pressing
the [MODE] key and then the [PAD 7] (PROGRAM).
Creating a program
To create a new program, proceed as follows.
Note : the MPC2500 is set to load the preset program automati-
cally when turned on. You can set the MPC2500 to start without
loading preset program. For more information, see the “Setting
the auto load function” on page 110.
01.
Press the [MODE] key and then the [PAD 7] (PROGRAM).
When you press the [MODE] key, its LED will blink.
When you press the [PAD 7] with the [MODE] key’s
LED blink, you can enter the PROGRAM mode.
02. Select the Pgm field and press the [WINDOW] key.
The Program window will be displayed.
03. Press the [F3] (NEW) key.
The New Program window will be displayed.
04. In the New name field, turn the DATA wheel.
The name window will be displayed. Set the name
for the new program and press the [F5] (ENTER)
key. For more information about setting the name,
see the “Setting names” section on page 10.
05.
In the New Program window, press the [F5] (DO IT) key.
The new program will be created.
The new program is “empty”, which means it does
not have any samples assigned. To play the pro-
gram, you need to assign samples to the pads in
the SAMPLE page of the PROGRAM mode.
Assigning/Reassigning
samples to the pads
You need to assign samples to the pads in the PROGRAM
mode so that you can play the samples with the pads. In this
section, you will learn how to assign samples to these pads
and how to change the current assignment.
01. Press the [MODE] key and then the [PAD 7] (PRO-
GRAM).
When you press the [MODE] key, its LED will blink.
When you press the [PAD 7] with the [MODE] key’s
LED blinking, you can enter the PROGRAM mode.
Pressing the [F1] (SAMPLE) key displays the
SAMPLE page.
The Pgm field in the upper left corner displays the
name of the currently selected program. You can
change the selected program in the Pgm field.
02. Hit the pad you wish to assign a sample to.
The pad number will be displayed in the left (the
section which says A01 in the above picture). The
pad number will change according to the pad you hit.
03. Select the 1 field and select the sample to assign to
the pad.
You can select the sample currently stored in the
MPC2500’s RAM by turning the DATA wheel.
You can assign samples by selecting 2 through 4
fields. If you assign samples to 2 through 4 fields,
you can play several samples by hitting the pad once.
88


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai MPC2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai MPC2500 in the language / languages: English as an attachment in your email.

The manual is 12,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Akai MPC2500

Akai MPC2500 Quick start guide - English, German, French, Italian, Spanish - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info