630577

Akai MPC2500 Manual

51
Zoom out
Zoom in
Previous page
1/136
Next page
MPC2500 Operator’s Manual rev 1.0
41
Deleting (DELETE) an event
To delete a selected Event, proceed as follows.
01. In the Event list, select the Grid and the Range that
you wish to delete.
You can select several Pads by pressing the up/
down cursor key while holding in the [SHIFT] key.
You can then select several Grids by pressing the
right/left cursor or turning the DATA wheel if you
continue to hold in the [SHIFT] key.
02. Press the [F4] (DELETE) key.
The selected Event will be deleted.
Note : you can delete an
Event in the ERASE win-
dow by pressing [Erase] key
in Grid Edit mode. For more information, see “Chapter 3 : Se-
quencer feature, Erase feature”.
Entering an event
Step recording
In the GRID EDIT mode, when you hit a pad, or when
the MPC2500 receives MIDI data from an external de-
vice, you can record the event in the current time posi-
tion (the time displayed in the Now field). Move the
event to the desired time position by moving through
the event list with the up/down cursor keys, or by set-
ting the time position in the Now field, and you can
add events to the desired time position one by one. This
is called Step Recording.
01. In the GRID EDIT mode, press the [REC] key or the
[OVER DUB] key.
The LED of the [OVERDUB] key will be lit, which in-
dicates that you can now enter events by hitting a pad.
02. Move the cursor to the time position you want to in-
sert an event by pressing the right/left cursor key.
You can also move the cursor by turning the DATA
wheel or selecting the time position in the Now field.
03. Hit a pad.
The Event will be recorded and the cursor will move
to the next grid automatically.
If you select NO in Auto step increment field in the
Step Edit Options in STEP EDIT mode, the MPC2500
will stop the auto step increment. See the Detailed
setting for Step Recording for more information of it.
04. Press the [STOP] key.
The LED of the [OVER DUB] key will be turned off
and you can finish the Step Recording.
Detailed setting for Step Recording
Pressing the [WINDOW] key in the STEP EDIT mode
will open up the Step Edit Option window, where you
can select various settings for Step Recording.
Auto step increment field
If you select YES, the MPC2500 will automatically up-
date the sequence according to the setting of the Tim-
ing Correct when it receives a Pad or a Note event.
Duration of Recorded Notes field
You can set how the duration that a pad (or MIDI
note) is pressed affects the Event that are recorded
during Step Recording.
AS PLAYED
The duration that a Pad (or MIDI note) is pressed
will be applied to the event exactly as you played
it. When you hit a pad (or MIDI note), the metro-
nome sound will start automatically. When you
release the pad (or MIDI note), the duration that
Event was pressed will be entered in the D (dura-
tion) field.
TC VALUE%
The value set in the timing correct will be entered
in the D (duration) field, regardless of the length
that you actually pressed the pad (or MIDI note).
Selecting the TC VALUE% will display the field,
where you can set the percentage of the duration to
apply to the current timing correct value.
Real time recording
In the GRID EDIT mode, you can record the sequence
data in real time by pressing the [REC] key or the [OVER
DUB] key and pressing the [PLAY] key at the same time.
Note : The event you recorded by real time recording displays on
the grid after stopping the recording.
… 51 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai MPC2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai MPC2500 in the language / languages: English as an attachment in your email.

The manual is 12,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Akai MPC2500

Akai MPC2500 Quick start guide - English, German, French, Italian, Spanish - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info