630577

Akai MPC2500 Manual

48
Zoom out
Zoom in
Previous page
1/136
Next page
MPC2500 Operator’s Manual rev 1.0
38
Chapter 6: Grid Edit
Basic operation
• Operation in Event area
When the cursor is in the NOW field, pressing the
down cursor key moves the cursor to the Event area.
The cursor in the Event area is at the grid where the
vertical and horizontal makers intersect. Your edit-
ing operations will be affected in the selected grid.
You can move the cursor in the Event area by the
cursor keys. You can also move the cursor to hori-
zontal directions by turning the DATA wheel.
If the Event area is not shown in the grid, the time
ruler will move and the next event area will be
shown by turning the DATA wheel.
When the horizontal marker is the upper side of
the Event area, pressing the up cursor key moves
the cursor to the Now field.
• Selecting a pad
In the pad field, you can select up to three pads at
one time.
You can select the displayed pad by hitting it. For
example, in the above drawing, if you hit the PAD
A05, the display will change as below.
The A03 that was at the bottom is in the second
row, and the A05 is at the bottom.
In this way, the last pad you hit is always displayed
at the bottom. But if you hit the pad that exists in
the Edit area, the horizontal marker moves to that
pad’s row. For example, if you hit the PAD A02 in
the previous display, the horizontal marker will
move to the A02’s row.
•
Relationship between the unit of the Grid and
the Timing Correct.
The unit of the grid in the Event area is changed by
Note value in Timing Correct window which is
shown by pressing the [F1] (T.C.) key.
When you set the Note value to 1/16, one unit of
the grid is 1/16 notes. When you set the Note value
to 1/8, one unit of the grid is seto to 1/8 notes. When
the Pad Events are in the grid, a “
” symbol is dis-
played in the grid.
Example: First, the Note value has been set to 1/32
and the Pad Events are recorded as in the drawing
below.
If you change the Note value to 1/16, the even area
will be changed as follws.
In this case, every single “ ” symbol is displayed
in the first four grids but each grid actually has two
Pad Events.
When you edit (such as copy/paste/delete/move)
the grid, all the Pad Events in the grid are edited.
Note : If you only wish to change how the units are displayed in
the grid, press the [F4] (CLOSE) key after changing the Note
Value in Timing Correct window. If you press the [F5] (FIX), the
MPC25000 will begin processing the Timing Correct change.
… 48 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai MPC2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai MPC2500 in the language / languages: English as an attachment in your email.

The manual is 12,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Akai MPC2500

Akai MPC2500 Quick start guide - English, German, French, Italian, Spanish - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info