630577
45
Zoom out
Zoom in
Previous page
1/136
Next page
MPC2500 Operators Manual rev 1.0
35
To change the length of the exclusive data, press the
[F2] (F7 EOX) key. Pressing the [F2] (F7 EOX) key en-
ters “F7”, which indicates the end of the exclusive data,
to the selected byte.
Pressing the [F5] (SEND) key sends out the currently
set exclusive data.
When you finish editing, press the [F4] (CLOSE) key
and close the window.
Copying / pasting an event
To copy the selected event and paste it to another location,
proceed as follows.
01.
In the event list, select the event that you wish to copy.
You can select several events by pressing the down
cursor key while holding the [SHIFT] key.
02. Press the [F3] (EDIT) key and the [F4] (COPY) key
at the same time.
When you press the [F3] (EDIT) key, the display of
the [F4] and the [F5] key will change to (COPY)
and (PASTE) respectively until you release the key.
03. In the Now field, select the time position that you
wish to paste the event to.
04. Press the [F3] (EDIT) key and the [F5] (PASTE) key
at the same time.
The selected event will be pasted.
Moving an event
To move the selected event to another location, proceed as
follows. The difference between Copy/Paste command is
that the selected event is not in the original location after
the Move function.
01.
In the Event list, select the Event that you wish to move.
You can select several Events by pressing the down
cursor key while holding the [SHIFT] key.
02. Press the [F3] (EDIT) key and the [F2] (MOVE) key
at the same time.
When you press the [F3] (EDIT) key, the display of
the [F2], [F4], and [F5] key will change to (MOVE),
(COPY), and (PASTE) respectively unitl you release
the key..
03. Move Event window will open.
Time= : the selected event time (the start point)
is displayed. You can not change this
value.
Move to : You set the time where you wish to
move the selected event.
04. Press the [F5] (DO IT) key.
The selected event will be moved.
Deleting an event
To delete the selected Event, proceed as follows.
01. In the Event list, select the Event that you wish to
delete.
You can select several Events by pressing the down
cursor key while holding the [SHIFT] key.
02. Press the [F4] (DELETE) key.
The selected Event will be deleted.
Note : You can delete the
Event by pressing the [Erase]
key in Step Edit mode.
For more i
nformation, see "Chapter 3 : Sequencer feature,
Erase featur".
After done the copying / deleting an Event, you can revert back
the previous status by pressing the [UNDO] key.
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai MPC2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai MPC2500 in the language / languages: English as an attachment in your email.

The manual is 12,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Akai MPC2500

Akai MPC2500 Quick start guide - English, German, French, Italian, Spanish - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info