630577

Akai MPC2500 Manual

32
Zoom out
Zoom in
Previous page
1/136
Next page
MPC2500 Operator’s Manual rev 1.0
22
Chapter 3: Sequence feature
While selecting the “No.” in the Pgm: field and the
cursor on it, pressing the [WINDOW] key will open
the Program Change window.
You can set a “MIDI Bank Select” message to trans-
mit together with a “MIDI Program Change” mes-
sage in this window. You can also set whether a
“MIDI Program Change” message recorded in the
track is transmitted or not.
Bank Select: (ON/OFF)
You can select whether a “Bank Select” message is
transmitted or not.
MSB:/ LSB: (0-127)
You can set “MSB” (Control Change # 0) and “LSB”
(Control Change #32) of a MIDI Bank Select mes-
sage from 0 to 127.
Transmit program changes in this track: (YES / NO)
You can select whether a “MIDI Program Change”
message recorded in the track is transmitted or not.
Track velocity feature
Allows you to adjust the Velocity ratio on the selected
Track while the sequence is playing.
Select the “V%:” field in the MAIN page and adjust the
Velocity ratio by turning the DATA wheel from 1% to 200%.
Note :
Changing the “V%” has no effect while recording sequence
data, it will only effect the playback of a sequence. If the velocity is
set to 127 (maximum), any setting over 100% will have no effect.
Track mute feature
You can set the track mute in the Mute field on the
MAIN page.
You can set the mute for each track independently. For
example, let’s assume you have recorded a Piano solo
on track 1 and another piano solo on track 2. By setting
either track to mute, you can compare these two piano
solos and choose the better one. If you set the mute ON
for a track, the MPC2500 won’t play back that track.
Tips : With the [TRACK MUTE] key, you can set the track mute
with a pad. For more information, see the “Setting the track mute
with pads” section on page 47.
Setting the MIDI Output channel
You can set the MIDI output channel in the MIDI field
on the MAIN page.
You can set the MIDI output channel for each track inde-
pendently. You need to set the output channel when you
use the MPC2500 to play an external MIDI sound mod-
ule. You do not have to set this when you are using the
internal sampler.
The MPC2500 has four MIDI outputs. Channels 1A
through 16A will be sent out via MIDI OUT A, MIDI chan-
nels 1B through 16B will be sent out via MIDI OUT B,
MIDI channels 1C through 16C will be sent out via MIDI
OUT C, and MIDI channels 1D through 16D will be sent
out via MIDI OUT D.
Changing a track name
01. In the Tr field in the MAIN page, select a track you
wish to change the name on.
02. Press the [WINDOW] key.
The Track window will open.
03. In the Track name field, enter the new name.
For more information for setting the name, see the
“Setting the name” section on Page 10.
04. Press [F4] (CLOSE) key.
This closes the window and goes back to the MAIN page.
Changing the default name for a track
Usually, when you create a new track, the name will be
automatically set as default “Track## (## indicates track
number). You can change the default track name.
01. In the MAIN page, select the Tr field.
02. Press the [WINDOW] key.
The Track window will open.
03. In the Default name field, enter the new name.
For more information about setting the name, see
the “Setting the name” section on Page 10.
04. Press [F4] (CLOSE) key.
This closes the window and goes back to the MAIN page.
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai MPC2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai MPC2500 in the language / languages: English as an attachment in your email.

The manual is 12,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Akai MPC2500

Akai MPC2500 Quick start guide - English, German, French, Italian, Spanish - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info