630577
12
Zoom out
Zoom in
Previous page
1/136
Next page
MPC2500 Operators Manual rev 1.0
2
Chapter 1: Introduction
DATA INPUT section
01. Numeric keys
These keys are used to enter numeric data directly.
Enter numbers with these keys into selected numeric
fields and press the [ENTER] key. If you are entering
numbers with a decimal value, enter the number ig-
noring the decimal point. (example: 120.5, enter
1205.). If you make a mistake, it is possible to cancel
by pressing the [SHIFT] key before the [ENTER] key.
If you use the [CURSOR] keys, [DATA] wheel, or
[MAIN] key while you are entering data with the nu-
meric keys, the input will be canceled and the data
returns to its original status.
02. [ - / + ] key
This key toggles a numeric value between (-) and (+).
03. [ENTER] key
This key finalizes the value that was input by the
numeric keys.
04. [DATA] wheel
This wheel changes the value of the currently se-
lected field. The data variably increases the faster
the wheel is turned. You can also adjust the con-
trast of the LCD by turning this wheel while hold-
ing in the [SHIFT] key.
05. [DATA] key ( [-] [+] keys)
[ - ]
key decreases the value of the highlighted cursor.
[ + ]
key increases the value of the highlighted cursor.
06. [MODE] key
When you press this key (LED will blink), you can
switch modes with pads.
⑦⑧
07. [MAIN] key
Pressing this key displays MAIN mode, regardless
the current mode.
08. [WINDOW] key
Pressing this key, when the LED is lit, displays a
pop up window where you can make a detailed
setting of the field.
09. [TAP TEMPO] key
You can set a desired tempo by tapping this key. (
TAP TEMPO feature) For more information, see the
“Tap Tempo feature” section on page 18.
10. [SHIFT] key
You can use various features with a combination of
another key.
11. [UNDO] key
When you record a sequence, the LED of this key
will light up. Pressing this key, when the LED is lit,
resets the system to its status before recording, and
LED will be turned off.
12. [CURSOR] key
You can move the highlighted cursor up and down
on the screen to select a field. In the value field, you
can switch digits by pressing </> keys, holding
[SHIFT] key. This changes the value of the currently
selected field.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai MPC2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai MPC2500 in the language / languages: English as an attachment in your email.

The manual is 12,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Akai MPC2500

Akai MPC2500 Quick start guide - English, German, French, Italian, Spanish - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info