Manual Akai MPC1000 V2.0 (page 12 of 74) (English, German, French, Italian, Spanish)

630571

Zoom out

Zoom in

1/74

08. Press “Play” on the CD Player.

The MPC1000 will start the recording automatically when the CD player starts the playback and the

bottom of the screen will change as below:

Tip : If the recording level is too low, the MPC1000 may not start the recording when you play the

CD player. In this case, go back to step 5 and adjust the level with the [ REC GAIN ] knob again.

09. Press the [ F6 ] (STOP) button to stop the recording.

If you do not press [ F6 ] (STOP), the MPC1000 will stop the recording at the time set in the Time

field.

When the MPC1000 finishes the recording, the Keep or Retry window will be displayed.

10. You can check the recorded sample by pressing and holding the [ F4 ] (PLAY) button.

The recorded sample will play until you release the button.

If you do not like the recording, you can remove the recording by pressing the [ F2 ] (RETRY)

button.

 Assigning the recorded sound to the pad

11. Select the Assign to pad field with the cursor and hit the pad to which you wish to assign the

sample.

The number of this pad will be displayed in the Assign to pad field.

12. Press the [ F5 ] (KEEP) button to save the sample to the selected pad.

This closes the Keep or Retry window and returns to the RECORD page.

Now you can play the recorded sample with the pad. Hit the pad to make sure the recorded sound

will be played.

Tip : The samples will be assigned to the pads of the program that is selected in the Pgm field of the

MAIN page. To assign the samples to a new program, you need to create a new program in

PROGRAM mode and select it in the Pgm field of the MAIN page in advance. For more information

about creating a new program, see the “Creating a program” section of the Operator's Manual.

(page 66)

Tip : You can play back only a specific part of the sample by adjusting the start/end points. For

more information, see the “Setting the loop” section of the Operator's Manual. (page 64)

Tip : You can change the assigned sample or set the playback method in the PROGRAM mode. For

more information, see the “Chapter12 : Program” section of the Operator's Manual. (page 66)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Akai MPC1000 V2.0 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Akai MPC1000 V2.0 Manual

Product: