630551

Akai MPC Fly 30 Manual

5
Zoom out
Zoom in
Previous page
1/20
Next page
5
4. MAIN – Press this button to view the Main screen in the display and software.
5. PLAY – Press this button to play the Sequence from the audio pointer's current
position.
6. PLAY START – Press this button to play the Sequence from its start point.
7. STOP – Press this button to stop playback.
8. REC – To start recording a Sequence, press this button and simultaneously
press PLAY or PLAY START. Recording in this way (rather than using
OVERDUB) erases the events of the current Sequence. After the Sequence
plays through once while recording, Overdub will be enabled.
9. OVERDUB – Press this button and simultaneously press PLAY or PLAY START
to enable Overdub. This allows you to record note events in a Sequence without
overwriting any previously recorded note events. You can enable Overdub either
before or during recording.
10. UNDO – Press this button to undo your last action.
11. ERASE – As a Sequence is playing, hold this button down and press a pad to
delete the note event for that pad at the current playback position. This is a
quick way to delete note events from your Sequence without having to stop
playback.
12. PADS – Use these pads to trigger drum hits or other samples in your software.
The pads are velocity-sensitive and pressure-sensitive, which makes them very
responsive and intuitive to play. The pads will light up different colors,
depending on how hard you play them (ranging from yellow at a low velocity to
red at the highest velocity).
13. FULL LEVEL – Press this button to activate/deactivate Full Level. When
activated, the pads always play back at a maximum velocity (127), no matter
how hard or soft you hit them.
14. 16 LEVEL – Press this button to activate/deactivate 16 Level. When activated,
the last pad that was hit will be temporarily copied to all 16 pads. The pads will
now output the same note number as the initial pad, but a selectable parameter
will be fixed at the values shown in the diagram on the right, regardless of how
hard you hit them. The available parameters are velocity, tuning, filter, layer,
attack or decay.
15. NOTE REPEAT – Hold this button down and press a pad to retrigger that pad's
sample at a rate based on the current Tempo and Time Correct settings. Vary
the pressure on the pad to increase or decrease the velocity of the notes being
played.
16. TIMING CORRECT – Press this button to switch through the available Timing
Correct (quantization) settings.
17. TRACK UP / DOWN – Use these buttons to move to move to the next or
previous track.
18. MUTE TRACK –
Press this button to mute the current track.
19. SOLO TRACK – Press this button to solo the current track.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai MPC Fly 30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai MPC Fly 30 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info