630538

Akai MAX25 Manual

14
Zoom out
Zoom in
Previous page
1/88
Next page
14
SysEx
Send Program: The Program to be sent via SysEx. The available options are the individual Program
numbers or ALL (all Programs). Press the VALUE DIAL to send the Program. "PROG: ___ SENT" will appear
to confirm the Program was sent successfully.
Utilities
Contrast: The LCD contrast. The available options are 0 to 99.
Save Globals
On this page, press the VALUE DIAL to store your global settings. After "Stored" flashes three times on the
LCD, the global settings are stored in MAX25's internal memory.
OS
Version: MAX25's current operating system information.
Boot ROM: MAX25's current ROM read-only memory information.
Run Mode: Determines MAX25's power state. When set to On, MAX25 will operate normally. When set to
LowPower, MAX25 enters Low-Power Mode. (If you enter Low-Power Mode when your DAW is open,
MAX25 will resume control of the DAW immediately after exiting Low-Power Mode.)
Program Change Mode
Use the VALUE DIAL to select which message is sent: Program Change or Program Bank.
Program Change
MIDI Channel: This setting determines over which MIDI channel data is sent. The available settings are
Common, USB A1-A16, and USB B1-B16.
Program Number: This determines the Program number that will be sent. The available range is 000 – 127.
Please refer to your external module's documentation for information on its available programs.
MIDI to DIN: Determines whether or not MIDI data is sent to the MIDI OUT (On) or not (Off). MIDI data will
be sent to MAX25's USB connection regardless of this setting. Since an external module will usually be
connected to MAX25's MIDI OUT, we recommend leaving this set to On.
Program Bank
MIDI Channel: This setting determines over which MIDI channel data is sent. The available settings are
Common, USB A1-A16, and USB B1-B16.
Program Number: This determines the Program number that will be sent. The available range is 000 – 127.
Please refer to your external module's documentation for information on its available programs.
Msb / Lsb: These determine the MSB (Most Significant Bit) and LSB (Least Significant Bit). The available
range is 000 – 127. Please refer to your external module's documentation for information on its available
programs.
MIDI to DIN: Determines whether or not MIDI data is sent to the MIDI OUT (On) or not (Off). MIDI data will
be sent to MAX25's USB connection regardless of this setting. Since an external module will usually be
connected to MAX25's MIDI OUT, we recommend leaving this set to On.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai MAX25 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai MAX25 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info