630538

Akai MAX25 Manual

8
Zoom out
Zoom in
Previous page
1/88
Next page
8
Touch Faders
Type: The type of event that will be sent. The available settings are Aft (Aftertouch), MIDI CC, Inc/Dec1
(Increment/Decrement, Mode 1), Inc/Dec2 (Increment/Decrement, Mode 2), Mackie, and HUI.
MIDI Channel: This setting determines over which MIDI channel data is sent. The available settings are
Common, USB A1-A16, and USB B1-B16.
CC Number: If MIDI CC is the selected Type, this determines the MIDI CC. The available range is 000 –
127.
MIDI to DIN: Determines whether or not MIDI data is sent to the MIDI OUT (On) or not (Off). MIDI data will
be sent to MAX25's USB connection regardless of this setting.
Mode: This determines how the fader will act when touched:
• Absolute: Touching the fader will cause it to jump immediately to that position. This mode is only
available when the Type is set to Aftertouch or MIDI CC. Holding [SHIFT] while moving a fader puts the
fader in Relative2 Mode, which will give you finer control.
• Relative: Sliding your finger upward or downward along the fader will cause its setting to move upward
or downward (regardless of your finger's absolute position on the fader).
• Relative2: This mode behaves like Relative Mode but with a finer resolution, allowing for more precise
adjustment. This mode is only selectable in this menu when the Type is set to Aftertouch or MIDI CC.
When a fader is in Relative Mode, you can manually put the faders in Relative2 Mode by holding
[SHIFT] and sliding your finger along it.
Min / Max: If Aftertouch is the selected Type, these determine the lowest (Min) and highest (Max) values. (If
Min is higher than the Max, the fader's polarity will be reversed.)
Msb / Lsb: If Inc/Dec1 is the selected Type, these determine the MSB (Most Significant Bit) and LSB (Least
Significant Bit). The available range is 000 – 127.
Value:
• If Inc/Dec1 is the selected Type, this determines the value sent by an Increment (CC#96) or Decrement
(CC#97) message. The available range is 000 – 127.
• If Mackie or HUI is the selected Type, this determines what the fader will control using that protocol.
The available settings are Fader 1-8, V-pot 1-8, and Master Level (Mackie only).
S-Switches
Type: The type of event that will be sent. The available settings are Note, CC#000-127, ProgramChange,
ProgramBank, MackieControl, and HUI.
MIDI Channel: This setting determines over which MIDI channel data is sent. The available settings are
Common, USB A1-A16, and USB B1-B16.
Note#: If Note is the selected Type, this assigns the note number.
Velo: If Note is the selected Type, this assigns the velocity. The available range is 000-127.
Mode: If Note, CC#000-127, Mackie, or HUI is the selected Type, this determines whether it is in Toggle or
Momentary Mode.
Invert: If CC#000-127 is the selected Type, the S-switches send 000 as the "off" value and 127 as the "on"
value. This determines whether the values sent are normal (Off), as described above, or switched/inverted
(On).
Program Number / Pgm: If ProgramChange or ProgramBank is the selected Type, this determines the
Program number. The available range is 000 – 127.
Msb / Lsb: If ProgramChange or ProgramBank is the selected Type, these determine the MSB (Most
Significant Bit) and LSB (Least Significant Bit). The available range is 000 – 127.
MIDI to DIN: Determines whether or not MIDI data is sent to the MIDI OUT (On) or not (Off). MIDI data will
be sent to MAX25's USB connection regardless of this setting.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai MAX25 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai MAX25 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info