752082
17
Zoom out
Zoom in
Previous page
1/22
Next page
.--
TROUBLE SHOOTING CHART
The conditions listed below do not indicate mechanical failure of your unit. If your machine exhibits
any of these conditions, check tor trouble as indicated.
SYMPTOM
"
Loss of sensitivity and tone
quality.
.
Machine will not record or
playback.
Irregularity in tape transport.
'.
r:
TROUBLE
*Dirty Erase Head.
*Wrong side of tape facing
the heads.
* A.C. power lower than the
voltage to which your machine
is adjusted.
*Magnetized head.
*Tape Selector Switch is set
incorrect1y.
* Check positions of controls
and inputjoutput.
* Check position of the Recording
Safety Button.
*Check position of the Shut-Offj
Tension Lever or Automatie
StopjTension Lever
*S.O.S.jEcho Selector Switch
at improper position.
* Pause Switch at ON position.
* on or magnetic particles
adhering to the Capstan or
Pinch Wheel.
*Sticky or dirty tape surface.
*Improperly loaded tape.
* A.C. power lower than the
voltage to which your machine
is adjusted.
*Sensing foil is affixed
improperly.
REMEDY
*See HEADS SHOULD ALWAYS
BE KEPT CLEAN.
*See VOLTAGE & CYCLE
CONVERSION.
* See HEAD DEMAGNETIZING.
*Check and correct.
* See PINCH WHEEL &
CAPST AN CLEANING.
*See HOW TO LOAD A
MAGNETIC TAPE.
*See VOLTAGE & CYCLE
CONVERSION.
*See AUTOMATIC & MANUAL
REVERSE RECORDING AND
PLA YBACK.
Tape will not TUn.
~
Previsously recorded program
will not eTage. .
Distorted or noisy sound.
No sound through headphones.
* Blown fuge.
* Power is not being supplied.
* Twisted or sticky tape.
*Erase head is dirty.
*Recording level is too high.
*Check external source controls
and connections.
*Une Output Level Controls
at minimum.
*Check power cord, Power Switch,
and Shut-OffjTension Lever
or Automatie StopjTension Lever.
*See HEAD SHOULD ALWA YS
BE KEPT CLEAN.
*Normal recording level is
zero VU.
*Set to "0" VU (5 position) and
then adjust headphone'
Volume Contral.
IIID
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai GX-400D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai GX-400D in the language / languages: English as an attachment in your email.

The manual is 7,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info