752082

Akai GX-400D Manual

12
Zoom out
Zoom in
Previous page
1/22
Next page
.
RECORDING
m:n ~, ~
~." '.
I
".
Make necessary program source connection to the appro-
priate inputs of this model as shown in CONNECTIONS
FOR RECORDING, and read the operating precautions on
page 4 be fore beginning operation. Then, load a tape
following the instructions on page 4.
Stereo Recording
1. Connect power cord and turn on Power Switch (A).
2. Set Reel Size Selector (B) according to reel size.
3. Depress both left and fight Track Selector Switches
(C).
4. Select tape speed with Tape Speed Selector Switch (D).
5. Set Index Counter (E) to "0000." This provides an
easy reference für locating positions on the tape.
6. Set Tape Selector Switch (F) to proper position. S.R.T
position is für Akai Super Range Tape or other make
low noise tapes, NORMAL position is für regular tapes.
7. Depress SOURCE Monitor Switch (G).
8. Adjust and balance input level with appropriate left
and fight Input Level Controls (H) while observing left
and fight VU Meters. Normal recording should not
exceed zero VU level on either meter.
9. When an optimum recording level hag been determined,
while holding the Recording Safety Button (I) at
depressed position, depress Forward Button (1) to
begin recording.
10. Depress Stop Button (K) to stop recording. To
momentarily stop tape movement use Pause Button.
.For normal recording, the S.O.S./Echo Selector Switch, at rear of
unit must be set to NOR. position.
.For automatie reverse recording, please refer to page S.
l1Q)
4.v
Monaural Recording
For monaural recording, follow stereo recording procedure,
substituting the following steps für steps (3), (8), and add
step ( 11).
Tracks 1-4
3. Depress left Track Selector Switch.
8. Adjust and balance input level with appropriate left
Input Level Control while observing the left VU Meter. '"
Normal recording should not exceed zero VU level.
11. For reverse recording on track 4, while holding
Recording Safety Button at depressed position, depress
Reverse Bu tton.
Tracks 3-2
3. Depress fight Track Selector Switch.
8. Adjust and balance inp4t level with appropriate fight
Input Level Control while observing the fight VU
Meter. Normal recording should not exceed zero VU
level.
11. For reverse recording on track 2, while holding
Recording Safety Button at depressed position, depress
Reverse Button.
ECHO EFFECT
For an interesting reverberation effect during recording,
follow recording procedure and set the S.O EcEEcho
Selector Switch at rear of unit to ECHO position after
accomplishing step 9. Note that the MIC-2jLINE Input
Level Controls must be set to maximum.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai GX-400D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai GX-400D in the language / languages: English as an attachment in your email.

The manual is 7,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info