752067
12
Zoom out
Zoom in
Previous page
1/17
Next page
RECORDING FROM AN EXTERNAL
AMPLIFIER
If an external amplifier or tuner amplifier is used, connect
the tape outputs of the external amplifier to the Line
Inputs in step E of stereo recording procedure.
RECORDING FROM A TURNTABLE
To record from a stereo or monaural disc, a crystal pick-up
can be connected directly to the Line Inputs in step E of
stereo recording procedure. If a magnetic or similar
cartridge is used, it must be connected to the Line Inputs
through an external amplifier.
TAPE DUBBING
When dubbing tape from another recorder, connect the line
outputs of playback machine to the line inputs of the
recording machine in step E of stereo recording procedure.
SOUND-ON-SOUND RECORDING
For transfer of previously recorded material from one track
to another accumulating as many individual recordings on a
single track as is desired. Use for language training or
various interesting musical compilations.
First Recording
A. Turn on Power Switch. The Power Indicator Lamp will
light.
B. Confirm that there are no connections to the Line
Input Jacks.
C. With the Reset Button set the Index Counter to
"0000".
D. Depress LEFT Track Selector Switch.
E. Insert microphone into left Microphone Jack.
F. Depress SOURCE Monitor Switch.
G. Adjust left Microphone Recording Level Control while
observing left VU Meter.
H. While holding Recording Safety Button at depressed
position, depress FWD Key. to begin first recording;
i.e., DO-RE-MI.
I. When the first recording is complete, rewind tape to
starting point.
the Din connector to the Din Jack and the black cord
Pin Plug to the left Line Input Jack.
Second Recording
J. Depress both Monitor Switches.
K. Depress RIGHT Track Selector Switch.
L. Increase Line Recording Level Control.
M. Connect stereo headphones to monitor first recording
on track 1.
N. While holding Recording Safety Button at depressed
position, depress FWD Key to begin second recording;
i.e., MI-FA-SOL.
O. Reset left Line Recording Level Control (decrease little
by little) until proper level is obtained.
The second recording is made. on track j as the rust
recording is monitored through headphones. The two
recordings. will be completely merged on track 3 ; i.e.,
DO-MI-RE-FA-MI-SOL.
Third and subsequent recordings are made in the same way
by switching LEFT and RIGHT Track Selector Switches.
For playback, set Track Selector Switch to track on which
last recording was made and depress the TAPE Monitor
Switch.
With the standard accessory l:onnection l:ord connect
I!1J
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai GX-370 D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai GX-370 D in the language / languages: English as an attachment in your email.

The manual is 3,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info