630567

Akai EWI4000s Manual

29
Zoom out
Zoom in
Previous page
1/52
Next page
27
b. “CC” (Continuous Controller): Press the TRANS BUTTON to enable the transmission of MIDI CC
data whenever you touch the GLIDE PLATE. A dot LED will light up on the PROGRAM / DATA
DISPLAY to indicate this function is enabled. Press the TRANS BUTTON again to disable it.
You can adjust the CC number by holding down the TRANS BUTTON and pressing the HOLD
BUTTON or OCTAVE BUTTON to decrease or increase the number, respectively. In order to
use the GLIDE PLATE to create the glide effect, however, this must be set to CC #5.
4. Press the SETUP BUTTON. The EWI4000s will return to Play Mode.
Setting the Glide Effect Time & Rate
This section explains how to set either the Time or Rate as constant during pitch shifting with the GLIDE
PLATE.
When Rate is selected, the speed of the pitch shift will remain constant, regardless of the range of the pitch
shift. If the pitch shift range is narrow, it shifts the pitch for a short time. If the pitch shift range is wide, it
shifts the pitch for a long time.
When Time is selected, the time of the pitch shift will remain constant, regardless of the range of the pitch
shift. If the pitch shift range is narrow, it shifts the pitch slowly. If the pitch shift range is wide, it shifts the
pitch quickly.
1. Press and hold the SETUP BUTTON.
2. Select “GL” (Glide) by pressing the HOLD BUTTON.
3. After selecting “GL”, release the SETUP BUTTON.
4. Select either “r” (Rate) or “t” (Time) by pressing the HOLD BUTTON or
OCTAVE BUTTON.
5. Press the SETUP BUTTON. The EWI4000s will return to Play Mode.
ADJUSTING THE KEY DELAY
The Key Delay function adjusts the response of the keys. The EWI4000s’s key response is preset to
accommodate rather quick fingering. As a result, you may occasionally produce unexpected sounds. In this
case, you may find that you can play more smoothly by adjusting the Key Delay.
1. Press and hold the SETUP BUTTON.
2. Select “dL” (Key Delay) by pressing the HOLD BUTTON.
3. Release the SETUP BUTTON. The currently selected Key Delay value will be
displayed on the PROGRAM / DATA DISPLAY.
4. Set your desired value by pressing the HOLD BUTTON (which increases the value) or OCTAVE
BUTTON (which decreases the value).
Note: You can play notes more smoothly with a larger Key Delay value, but it may prevent you from
playing quickly. We recommend setting as small a value as possible.
5. Press the SETUP BUTTON. The EWI4000s will return to Play Mode.
Note: If you press a button other than the SETUP BUTTON, HOLD BUTTON, or OCTAVE BUTTON, your
Key Delay value will be ignored and return to the original value.
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai EWI4000s at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai EWI4000s in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info