630567
24
Zoom out
Zoom in
Previous page
1/52
Next page
22
Adjusting the Reverb Effect Volume of Each Program
This procedure adjusts the volume of the Reverb effect for each Program individually, as opposed to the
overall Reverb effect volume. The Reverb effect volume of each program is stored in the EWI4000s.
1. Select the program whose Reverb effect volume you want to adjust.
2. While holding the FX BUTTON, press the SETUP BUTTON. While pressing
both these buttons, “rb” will be shown in the PROGRAM / DATA DISPLAY.
3. Release both buttons. The current Reverb effect volume of the selected
program will be displayed.
4. Adjust the Reverb effect volume by pressing the HOLD BUTTON (which increases the volume value) or
OCTAVE BUTTON (which decreases the volume value).
5. Press the SETUP BUTTON. The EWI4000s will return to Play Mode.
Adjusting the Delay Effect Volume of Each Program
This procedure adjusts the Delay effect volume for each Program. The Delay effect volume setting of each
program is stored in the EWI4000s.
1. Select the program you wish to adjust the Delay effect volume.
2. While holding the FX BUTTON, press the SETUP BUTTON. While pressing both these buttons, “rb
will be shown in the PROGRAM / DATA DISPLAY.
3. While pressing the SETUP BUTTON, release the FX BUTTON, then press the
HOLD BUTTON so the PROGRAM / DATA DISPLAY now shows “dL.”
4. Release the SETUP BUTTON and HOLD BUTTON. The current Delay volume
of the selected Program will be displayed.
5. Adjust the Delay volume by pressing the HOLD BUTTON (which increases the volume value) or
OCTAVE BUTTON (which decreases the volume value).
6. Press the SETUP BUTTON. The EWI4000s will return to Play Mode.
Adjusting the Chorus Effect On/Off on Each Program
This procedure selects whether the Chorus effect is set on or off for each Program. The Chorus effect
setting of each Program is stored in the EWI4000s.
1. While holding the FX BUTTON, press the SETUP BUTTON. While pressing both these buttons, “rb
will be shown in the PROGRAM / DATA DISPLAY.
2. While pressing the SETUP BUTTON, release the FX BUTTON, then press the
HOLD BUTTON so the PROGRAM / DATA DISPLAY now shows “CH.”
3. Release the SETUP BUTTON and HOLD BUTTON. The current Chorus setting
of the selected program will be displayed.
4. Set the Chorus to eitheron” or “OF” by pressing the HOLD BUTTON or OCTAVE BUTTON.
5. Press the SETUP BUTTON. The EWI4000s will return to Play Mode.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai EWI4000s at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai EWI4000s in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info