630535
25
Zoom out
Zoom in
Previous page
1/49
Next page
25
Pitch-Bend Plates
To calibrate the pitch-bend plates:
1. Press and hold the Setup Button to enter Setup Mode.
2. Press the Hold Button or Interval Button to scroll through the options until CL
(Calibration) appears in the display.
3. Release the Setup Button. The display will show the current sensor. Use the Hold
Button or Interval Button to PU (Pitch-Bend Up Plate) or Pd (Pitch-Bend Down
Plate).
4. You can use the Chorus, LFO, and Reverb Parameter Knobs to adjust the sensor. You
can touch the pitch-bend plate to test the setting. The Setup Button LED will light up
when the EWI5000 detects you are touching the pitch-bend plate. The Trans Button LED
will light up when the pitch-bend plate is at its maximum value.
Turn the Chorus Parameter Knob to adjust the pitch-bend plate's sensitivity. 00 is
the lowest sensitivity, while 99 is the highest. We recommend turning this knob while
not touching the pitch-bend plate and setting it just below the point where the
Setup Button LED lights up.
Turn the LFO Parameter Knob to adjust the pitch-bend plate's dynamic range. 00
is the smallest range, while 99 is the largest. We recommend touching the pitch-
bend plate as you would to get a maximum value, and setting this knob just above
the point where the Trans Button LED lights up.
Turn the Reverb Parameter Knob to adjust the pitch-bend plate's rate of change.
00 is the lowest rate, while 99 is the highest.
Important: You may want to touch other pitch-bend plate or glide plate to ensure they
are not triggering the pitch-bend plate you are adjusting. The glide plate and pitch-bend
plates are all partially associated, so their sensitivities may need to be adjusted relative to
each other.
5. To return to Performance Mode, press the Setup Button until the display is blank.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai EWI 5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai EWI 5000 in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info