630535
21
Zoom out
Zoom in
Previous page
1/49
Next page
21
Lt (Legato Time): The glide plate will send its messages using CC #104, which the
EWI5000 uses for Legato Time. This is the time during which a note ends as a new
note begins. Shorter times will result in more abrupt changes between notes, while
longer times will result in more fluid changes that sound almost slurred. (This is
different from portamento, though, as Legato Time does not shift the pitch of any
notes.)
If you select this, press the Trans Button to set additional parameters:
o En (Enable): This determines whether CC #104 output is enabled or disabled.
If you select this, press and hold the Trans Button, and press the Hold Button
or Interval Button to turn it on (On) or off (OF). When it is on, a dot will appear
in the display.
o dU (Data-Up): The value that will be sent with the CC message when you are
not touching the glide plate. Press and hold the Trans Button, and then use
the Hold Button or Interval Button to set the value (00127; values over 99 will
be shown as the last two digits with a dot between them).
o dP (Data-Press): The value that will be sent with the CC message when you
touch the glide plate. Press and hold the Trans Button, and then use the Hold
Button or Interval Button to set the value (00127; values over 99 will be
shown as the last two digits with a dot between them).
CC (Continuous Controller): The glide plate will send a MIDI Continuous Controller
(CC) message. If you select this, press the Trans Button to set additional message
parameters:
o En (Enable): This determines whether CC output is enabled or disabled. If you
select this, press and hold the Trans Button, and press the Hold Button or
Interval Button to turn it on (On) or off (OF). When it is on, a dot will appear in
the display.
o Cn (Controller Number): This is the CC number that will be sent when you
touch the glide plate. Use the Hold Button or Interval Button to set the CC
number (01127; values over 99 will be shown as the last two digits with a dot
between them). Match this number to the CC number of the parameter you
want to control.
Important: We recommend setting En to off (OF) before changing this
parameter to prevent accidentally muting the EWI5000's output while moving
through CC #7 (Volume).
o dU (Data-Up): The value that will be sent with the CC message when you are
not touching the glide plate. Use the Hold Button or Interval Button to set the
value (00127; values over 99 will be shown as the last two digits with a dot
between them).
o dP (Data-Press): The value that will be sent with the CC message when you
touch the glide plate. Use the Hold Button or Interval Button to set the value
(00127; values over 99 will be shown as the last two digits with a dot between
them).
4. To return to Performance Mode, press the Setup Button until the display is blank.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai EWI 5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai EWI 5000 in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info