630535
10
Zoom out
Zoom in
Previous page
1/49
Next page
10
9. Grounding Plate: Always touch these plates while playing.
10. Octave Rollers: Move your thumb up or down over these rollers to shift the note keys'
range. You can shift them up to four octaves higher or up to two octaves lower. Always
touch these octave rollers while playing.
11. Glide Plate: Touch this plate while playing a note to produce a "glide" effect, which
smoothly and continuously slides the pitch up or down—a technique known as
portamento.
12. Neck Strap Clip: Connect the included neck strap here.
13. Program Button: Without touching any note keys, touch this screw to display the current
Program (internal sound) in the display. You can then press the Hold Button to move to
the next Program or press the Interval Button to move to the previous Program.
14. Pitch-Bend Plates: Touch the upper or lower plate while playing a note to raise or lower
its pitch, respectively. You can adjust the position of these plates by loosening their
screws.
15. FX (Effects) Button: Press and hold this button and then use the Hold Button and
Interval Button to select Reverb (rb), Chorus (ch), or Delay (dL). You can then release
the FX Button and use the Hold Button to increase the effect level or press the Interval
Button to decrease the effect level.
16. Level Button: Press this button to show the Main Output level in the display. You can
then press the Hold Button to increase the level or press the Interval Button to decrease
the level.
17. Bank Button: Press this button to switch between the bank of Preset Programs and the
bank of User Programs. The Preset LED and User LED next to it will indicate which bank
is selected, Preset or User.
18. Save Button: Press this button to enter Save Mode. The "destination" User Program
number will then blink in the display. Use the Hold Button and Interval Button
to select
the User Program number you want to save to, and press the Save Button again to save
the Program, or press any other button to cancel the operation.
19. Wireless Switch: Selects whether or not the EWI5000 is "paired" with the wireless
receiver. To do this, connect the wireless receiver to a USB port on your computer.
(Alternatively, connect the receiver to the included USB power adapter, and connect the
adapter to a power outlet.) The receiver's Pair LED will flash. With the EWI5000 powered
on, set this Wireless Switch to On. It will automatically pair to the wireless receiver.
When it is paired to the wireless receiver, the wireless receiver's Pair LED and the
EWI5000's Preset LED or User LED (next to the Bank Button) will both light solid.
Note: If the connection is lost, you can manually pair the EWI5000 to the receiver by
pressing the receiver's Pair Button and then pressing the EWI5000's Power Button
once.
20. Power: Press and hold this button for a full second to power the EWI5000 on or off.
21. MIDI Out: Use a standard five-pin MIDI cable to connect this port to an external sound
module's MIDI In port, allowing you to use the EWI5000 as a MIDI controller for that
sound module.
22. Phones: Connect headphones (optional, sold separately) here with a stereo 1/8" (3.5mm)
cable.
23. Battery Compartment: Use a standard Phillips-head screwdriver (not included) to
remove the battery compartment cover, install the battery, and re-secure the cover.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai EWI 5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai EWI 5000 in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info