630569

Akai EIE Manual

5
Zoom out
Zoom in
Previous page
1/20
Next page
5
7
FRONT PANEL FEATURES
1. MIC/LINE / GUITAR INPUT –
Connect a microphone, line-level
device or guitar to this input with an
XLR or 1/4" TRS cable.
2. GAIN – Adjusts the input's gain
level.
3. LEVEL MIC/LINE / GUITAR
SWITCH – When the switch is in
the "MIC/LINE" position, the
channel will accept mic or line-level
signals. When this switch is in the
"GUITAR" position, the channel will
serve as a high-impedance input for
connecting guitar or bass instruments.
4. PHANTOM POWER SWITCH – This switch activates and deactivates phantom power for each channel
pair (Channels 1 and 2 and/or Channels 3 and 4). When activated, phantom power supplies +48V to
both XLR mic inputs. Please note that most dynamic microphones do not require phantom power, while
most condenser microphones do. Consult your microphone's documentation to find out whether it
needs phantom power.
5. VU METERS – These meters display the volume level of the channel pairs, depending on the setting of
the METER SELECTION CHANNEL SWITCH. These meters will be lit whenever EIE is powered on.
The red light indicates the signal is distorting or "clipping." If the signal is regularly clipping, reduce the
volume of the mix and/or individual channels.
6. METER SELECTION CHANNEL SWITCH – This switch selects which pair of channels the left and
right VU METERS will display (respectively) – Channels 1 and 2 ("1/2") or Channels 3 and 4 ("3/4").
7. METER SELECTION MONITOR SWITCH – This switch selects whether the VU METERS will display
the volume level at the inputs ("IN") or outputs ("OUT").
8. MASTER LEVEL – Adjusts the output volume of the AUDIO OUTPUTS 1 and 2.
9. MONO / STEREO – Adjusts the master mix for mono or stereo operation.
10. HEADPHONE – Connect a set of 1/4" TRS headphones to this output.
11. HEADPHONE VOLUME – Adjusts the output volume of the PHONES output.
12. HEADPHONE SELECT SWITCH – This switch selects what channels are sent out the HEADPHONE
output – Channels 1 and 2 ("1/2"), Channels 3 and 4 ("3/4"), or all channels ("ALL").
13. MONITOR MIX – Blend in any amount of zero-latency signal from your inputs ("IN") with the output of
your computer ("OUT").
REAR PANEL FEATURES
1. DC INPUT – Connect the included
power adapter (6V, 3A, center pin-
positive) here, then connect the
adapter to wall power.
2. POWER SWITCH – Turns the EIE on
and off.
3. USB MIDI – This connection will
allow you to send MIDI information
to/from a computer. Use a USB cable
to connect the EIE to a computer.
4. USB HUB OUTPUTS – You can
connect additional USB devices
(controllers, hard drives, etc.) to these powered USB ports. In addition to being an audio interface,
these ports allow EIE to function as a powered USB hub.
5. AUDIO INPUTS (INSERTS) – You can use standard 1/4" TRS cables to connect external processors
(such as compressors, limiters, external EQ units, etc.) to these jacks. The signal will be taken after the
channel's gain control and returned before the channel's USB audio is sent to the computer.
6. AUDIO OUTPUTS – Use standard 1/4" TRS cables to connect these outputs to monitors, an amplifier
system, etc. The level of AUDIO OUTPUTS 1 and 2 are controlled by the MASTER LEVEL knob. The
level of AUDIO OUTPUTS 3 and 4 are always at full volume.
7. MIDI OUT – Use a standard five-pin MIDI cable to connect this output to the MIDI IN of an external
MIDI device.
8. MIDI IN – Use a standard five-pin MIDI cable to connect this input to the MIDI OUT of an external MIDI
device.
1
2
334433
5
67
8
9
10
11
12
13
5
222
111
1
2
4
55556666
78
44
3
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai EIE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai EIE in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info