630583
123
Zoom out
Zoom in
Previous page
1/167
Next page
13: Backup and Restore
Page 114
Restoring from SCSI Tape Drive
The RESTORE process will restore your backups from the SCSI Tape Drive back to the hard
disk.
1) Press the SUB-MENU key followed by the 1(DISK) key in the numeric keypad then
select “RESTORE” on the display by rotating the JOG/SHUTTLE control.
2) Press the STORE/ENT key . The message RESTORE 0 will appear in the display.
3) Select the SCSI ID number of the hard disk that is to be restored using the JOG/
SHUTTLE control and press the STORE/ENT key.
The message “DIGI in XLR” will be displayed.
4) Select “TAPE SCSI” using the JOG/SHUTTLE control.
5) Press the STORE/ENT key and the message “TAPE ID 0” will appear in the dis-
play. This is the SCSI ID of the SCSI Tape Drive you are restoring from.
6) Select the SCSI ID of the SCSI Tape Drive using the JOG/SHUTTLE control then press
the STORE/ENT key to start restoring.
NOTE:
If the data on the tape is not read properly for some reason, the message
“BAD
TAPE”
will appear on the display and the restore operation is aborted.
Restoring from multiple tapes
When restoring backups spread across several tapes, the message “NEXT TAPE” will appear in
the display when a tape comes to an end during the restore operation.
7) Replace the tape in the SCSI Tape Drive with the next one required.
8) Press the STORE/ENT key to continue restoring.
Press the ESCAPE key to abort the restore operation.
NOTE:
When the data has been backed up over several tapes, the tapes MUST be loaded
in the same order as they were backed up. If a wrong tape is inserted, the message
“WRONG TAPE”
will appear on the display and the restore operation will pause, allowing
you to insert the correct tape. To continue restoring, place the correct tape then press the
STORE/ENT key.
Restore
Before you restore your backup to the hard disk, it is recommended to delete all the data from the
disk by using the erase function (see “Erasing Disks” on page 104), although the data is deleted
automatically when restored. Backup any data that you want to keep before you do this (see”Backup”
on page 110).
Note:
The restore function is available only for the entire disk. You cannot restore individual
projects. If you have backed up individual projects to multiple tapes in Project mode, you
cannot restore them to the same disk.
123


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai DR16 Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai DR16 Pro in the language / languages: English as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info