630583
120
Zoom out
Zoom in
Previous page
1/167
Next page
13: Backup and Restore
Page 111
3) Select “SCSI” with the JOG/SHUTTLE control then press the STORE/ENT key.
The message “TRANSMIT” will appear in the display.
4) Select TRANSMIT” with the JOG/SHUTTLE control (if not already selected) and
then press the STORE/ENT key.
The message “TAPE ID 0” will be displayed. This is the SCSI ID number of the SCSI
Tape Drive that is to be formatted.
5) Select the SCSI ID number of the SCSI Tape Drive using the JOG/SHUTTLE control
and press the STORE/ENT key.
The message “ENTIRE 0” will appear in the display.
6) Select the SCSI ID of the hard disk that is to be backed up using the JOG/SHUTTLE
control.
Select “0” to backup the internal hard disk.
7) Select the type of backup mode (“ENTIRE” orPROJECT”) with the JOG/SHUTTLE
control then press the STORE/ENT key.
ENTIRE..........to backup the entire contents of disk
PROJECT.......to backup by the project
8) When ProJECT is selected in step 7 above, select the project name you want to
backup using the JOG/SHUTTLE control and then press the STORE/ENT key to start
the backup.
When the backup is completed, the message “DONE” will be displayed momentarily, then
it resumes normal mode operation.
Press the ESCAPE key to abort backup operation.
Note 1:
If the tape in the SCSI Tape Drive is write protected, the message
TAPE ProT”
will
appear on the display and the backup operation will pause allowing you to eject the tape and
disable its write protect tab. Press the STORE/ENT key to continue the backup operation, after
disabling the write protecting tab (or ESCAPE to abort).
Note 2:
If the tape already contains backup data, the message
TAPE USED”
will appear in
the display and the backup operation will be aborted automatically.
Note 3:
If the tape is not formatted, the message
RE FORMAT”
will appear in the display.
The tape will be formatted when the STORE/ENT key is pressed. ALL DATA ON THE TAPE
WILL BE ERASED!!
120


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai DR16 Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai DR16 Pro in the language / languages: English as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info