630583
117
Zoom out
Zoom in
Previous page
1/167
Next page
12: Hard Disks
Page 108
10) Press the STORE/ENT key again to start copying.
As the DR16pro copies the disk, the message “COPYING” will appear on the display.
When the copy function is complete, the message “DONE” will appear on the display.
The previous mode will be restored.
Note:
If you selected a source or destination SCSI ID that had no corresponding disk, an
error message will appear on the display.
Disk Copy Notes
You cannot playback recorded data on the DR16pro if you have changed the disk SCSI ID. See
“SCSI IDs” on page 98.
When the DR16pro records data to a hard drive, it includes the SCSI ID in the data. If you copy
data from one disk to another (for example, you copy data from disk ID 0 to disk ID 1) the data is
copied with the destination disk SCSI ID (that is, the data is recorded as being from disk ID 1).
Copying a project
You can copy projects one by one from the current disk to another disk.
Note:
No data will be erased from the destination disk by the Project Copy operation; new data
will be added to the disk.
Note:
You cannot use the Copy Project function to duplicate a project on the same hard disk.
To accomplish this, you must instead assign the project to a take, create a new project, and
commit the take. See “Projects” on page 54.
To copy a project to another disk:
1) Follow steps 1) through 7) of the Disk Copy procedure.
See “Copying an entire disk” on page 107.
2) Press the STORE/ENT key.
The message “ENTIRE” will appear on the display.
3) Use the JOG wheel to select ProJECT”.
4) Press the STORE/ENT key.
The display will show the name of projects that exist on the copy source disk.
5) Rotate the JOG wheel to select a project you wish to copy.
6) Press the STORE/ENT key.
The message “SURE ?? will appear on the display.
If you change your mind, press the ESCAPE key to cancel the Copy operation.
7) Press the STORE/ENT key again to start copying.
As the DR16pro copies the project, the message “COPYING” will appear on the display.
When the copy function is complete, the message “DONE” will appear on the display. The
previous mode will be restored.
Note:
If you selected a source or destination SCSI ID that had no corresponding disk, an
error message will appear on the display.
117


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai DR16 Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai DR16 Pro in the language / languages: English as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info