630583

Akai DR16 Pro Manual

72
Zoom out
Zoom in
Previous page
1/167
Next page
7: Mixer
Page 63
4) Rotate the JOG wheel to change the level value.
The send pan position range is from L63 (extreme left) through MID (center)to R63(extreme
right). The default pan position is MID.
The pan position will also be displayed graphically using the peak level meters.
When the Auxiliary Send is set to mono (see “Selecting Mono or Stereo Send” on page 66),
you set the two send levels for each input channel with the following functions.
Mono send level:
1) Rotate the JOG wheel to select the desired function.
Select either the “SEND1” or the “SEND2” function.
2) Rotate the SHUTTLE control to move the cursor to the data item.
The send level data will be underlined: “SEND: 0 0 0”. This example shows the “SEND1”
function.
3) Select the channel(s) you want to modify.
4) Rotate the JOG wheel to change the level value.
The send level range is from 000 to 127. The default send level for both send channels is
000.
The send level will also be displayed graphically using the peak level meters.
Selecting the Bus Send
The internal stereo bus is used when you are performing bounce-down recordings. Also see “Us-
ing the BUS function” on page 36. This Mix Mode function turns on the bus send for the selected
input channel(s). The level and stereo pan position of the channel were set in previous steps.
1) Rotate the JOG wheel to select the “BUS” function.
2) Rotate the SHUTTLE control to move the cursor to the data item.
The bus send data will be underlined: “BUS O F F”.
3) Select the channel(s) you want to modify.
4) Rotate the JOG wheel to toggle the bus send “ON” or “OFF”.
The default is OFF.
Setting the Fade
This function allows you to set the fade parameters so that the sound fades in and out. Storing
these settings in the Snapshots (see “Snapshot Settings” on page 68) and creating a Snapshot
map (see “Mapping Snapshots” on page 69) for automated mixing will create AutoFade data.
1) Rotate the JOG wheel to select the “FADE” function.
2) Rotate the SHUTTLE control to move the cursor to the data item.
The fade data will be underlined: FADE O F F.
3) Select the channel(s) you want to modify.
… 72 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai DR16 Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai DR16 Pro in the language / languages: English as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info