630583
30
Zoom out
Zoom in
Previous page
1/167
Next page
1: Front and Rear Panels
Page 21
10) ANALOG INPUT (1 ~ 8) connectors
These 1/4 inch stereo phone jacks are used to input analog signals to the DR16pro. They
accept balanced and unbalanced signals: Tip = hot, ring = cold, sleeve = ground. Unlike
conventional multi-track recorders, the eight inputs are not ‘hardwired’ to their corresponding
tracks but can be assigned to any track you like.
11) Input gain switches
These switches allow you to set the DR16pro input gain. They can be set to LOW (0 dB), MID
(+20 dB), or HIGH (+40 dB). Input gain switches are provided for each pair of channels:
channels 1/2, channels 3/4, channels 5/6, and channels 7/8.
12) ANALOG OUTPUT (1 ~ 12) connectors
These 1/4 inch stereo phone jacks are used to output analog signals from the DR16pro. They
can be used balanced or unbalanced: Tip = hot, ring = cold, sleeve = ground.You set the
output gain for these connectors with the level switch (13). They can be set to LOW (-10 dBu)
or HIGH (+4 dBu).
13) Output level switches
These switches allow you to set the DR16pro output level. They can be set to LOW (-10 dBu)
or HIGH (+4 dBu). Output level switches are provided for each pair of channels: channels 1/
2, channels 3/4, channels 5/6, channels 7/8, channels 9/10, channels 11/12, channels 13/14,
and channels 15/16.
14) ANALOG OUTPUT 13, 14 - SEND 1/2 connectors
These 1/4 inch stereo phone jacks carry the individual analog tracks 13 and 14 or the two
effects or auxiliary sends in MIX mode. They can be used balanced or unbalanced: Tip = hot,
ring = cold, sleeve = ground. You set the output gain for these connectors with the level switch
(13). They can be set to LOW (-10 dBu) or HIGH (+4 dBu).
15) ANALOG OUTPUT 15, 16 - MASTER L/R connectors
These 1/4 inch stereo phone jacks are used to output the individual analog tracks 15 and 16
or an analog stereo mix of the 16 tracks in MIX mode. This is an analog duplication of the
digital signal appearing at the DIGITAL I/O - MASTER OUT output jacks. They can be used
balanced or unbalanced: Tip = hot, ring = cold, sleeve = ground. You set the output level for
these connectors with the level switch (13). They can be set to LOW (-10 dBu) or HIGH (+4
dBu).
LR
LOW HIGH
MASTER
12
HIGH LOW
GAIN MID
78
HIGH LOW
GAIN MID
34
HIGH LOW
GAIN MID
56
HIGH LOW
GAIN MID
LR
LOW HIGH
MASTER
SEND
12
LOW HIGH
LR
LOW HIGH
MASTER
LR
LOW HIGH
LR
LOW HIGH
LR
LOW HIGH
LR
LOW HIGH
MASTER
ANALOG INPUT
12
LOW HIGH
78
LOW HIGH
34
LOW HIGH
56
LOW HIGH
ANALOG OUTPUT
910
LOW HIGH
11 12
LOW HIGH
13 14
15 16
10 11
12 13 13 14 15 13
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai DR16 Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai DR16 Pro in the language / languages: English as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info