630581

Akai DPS24 MK II Manual

51
Zoom out
Zoom in
Previous page
1/252
Next page
39
User Guide
Pressing RESET MIXER will reset the entire mixer to 'flat' according to the option selected in
RECALL CONTROLS as follows:
ALL Will reset all controls (faders, pans, sends, EQ, channel dynamics chan-
nel on/off, FX/MBCX settings, etc.)
STATIC ONLY Will reset all static controls (EQ, channel dynamics, FX/MBCX settings)
NO FADERS Will reset all controls except the faders It is also possible to automate
scene recalls - that is, as the dynamic automation is running, scenes can
be recalled at any time as part of the automation. Recalling a scene re-
calls all the selected parameters (ALL, STATIC or NO FADERS) for all
Mixer Channels and all FX channels.
EQ, DYNAMICS and FX Snapshots recall can also be automated for individual channels.
SCENE and SNAPSHOT automation is described later in this Manual in the AUTOMATION section.
IMPORTANT NOTE ABOUT SCENE 00 : INITIAL SCENE
The DPS24's dynamic mixer automation uses Scene 00 as its reference point. If the automation is
switched ON, whenever you press PLAY at any point in the project, the automation refers to Scene 00
so that it knows where it should be and what automation data it should be playing.
This means that Scene 00 sets the initial mix settings for the project. If you subsequently change any
of the parameters that are not dynamically automated, these will be reset to Scene 00's settings when
you press play.
As an example, Scene 00 in your project has all channels' EQ set 'flat' (i.e. no EQ applied).
Someway through the project, however, you adjust one channel's EQ. When you press PLAY, that
channel's EQ will be reset to the settings stored in Scene 00. Another example is that you set a pair of
channels to be linked as a stereo pair at some point and set each channel's pan position to hard left and
right respectively - when you press PLAY, if that link and the pan positions have not been saved into
Scene 00, they will be reset.
In other words, if you make a change that you like to any parameters that are not dynami-
cally automated, ensure that you store the changes in Scene 00 so that they are recalled with
the dynamic automation.
RECALLING A MIX SCENE
… 51 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai DPS24 MK II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai DPS24 MK II in the language / languages: English as an attachment in your email.

The manual is 10,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info